WPA && bridge_packets dont work

[Jouni Malinen]

On Tue, Sep 07, 2004 at 05:09:02PM +0200, Wilfried Klaebe wrote:

> When I give the AP's eth0 it's IP, and wlan0 some private IP (10.40.0.1
> in this case), there's no problem. My laptop can ping the AP from 10.40.0.2,
> can ssh to it, can connect through it (via NAT) anywhere it wants, anything.
> 
> But when I set up bridging - br0 with slaves eth0 and wlan0, eth0 and wlan0
> both up, br0 with the IP that eth0 had before, just as described several
> times before, my laptop  I cannot ping it anymore.

Have you tested this without RSN just using plaintext?

Can you please send 'brctl show', 'brctl showstp br0', and 'ifconfig'
output from the case where ping does not work?

-- 
Jouni Malinen                                            PGP id EFC895FA