Compile Issues - AR5212 + Madwifi + wpa_supplicant-0.2.5

Tue Oct 5 21:52:15 PDT 2004

Ok... I dug around some more and was able to configure
my Cisco AIR-CB21AG-A-K9 (which uses the AR5212
chipset) to work with WPA-PSK using the following:

1. Kernel version 2.4.26
2. latest CVS Madwifi drivers with WPA support
3. wpa_supplicant-0.2.5

The main hangup I had was a major "duh" factor as I
suspected.  I really just needed to specify the
appropriate path in the wpa_supplicant Makefile's
Madwifi section.

This path is the parent directory of the downloaded
madwifi source code.  In my case it was the following:

ifdef CONFIG_DRIVER_MADWIFI
CFLAGS += -DCONFIG_DRIVER_MADWIFI
CFLAGS += -I/usr/src/compiled/madwifi
OBJS += driver_madwifi.o
CONFIG_WIRELESS_EXTENSION=y
endif

Anyway... Just thought I'd update the group on my
progress.  Next is WPA with EAP-PEAP/MSCHAPv2 and
EAP-PEAP/GTC.  Should be cake from this point on.

A helpful link I found was:

http://www.linux-wireless.org/Install-HOWTO/Drivers/madwifi/

Cheers.

--- Gilbert Mendoza <linuxcruiser at yahoo.com> wrote:

> Hey there folks,
> 
> Having an issue compiling wpa_supplicant-0.2.5 for
> use
> with the AR5212 chipset.  It's prolly something real
> simple I'm overlooking.
> 
> I understand that for Madwifi drivers you need to
> specify in the Makefile where the Madwifi driver
> root
> directory is located... but I am not sure where that
> would be.  Errr... I know it has to be something
> lame.
> 
> Does this mea the location of where my modules are
> located?  e.g "/lib/modules/2.4.26/net/ath_hal.o" 
> Or
> is it refering to where a copy of the madwifi driver
> source code is located?  Possibly something else?
> 
> Any help would greatly be appreciated.
> 
> 
> Here is my .config file:
> 
> -------------------------------------------
> CONFIG_DRIVER_MADWIFI=y
> CONFIG_WIRELESS_EXTENSION=y
> CONFIG_IEEE8021X_EAPOL=y
> CONFIG_EAP_MD5=y
> CONFIG_MSCHAPV2=y
> CONFIG_EAP_TLS=y
> CONFIG_EAP_PEAP=y
> CONFIG_EAP_TTLS=y
> CONFIG_EAP_GTC=y
> CONFIG_EAP_OTP=y
> CONFIG_EAP_SIM=y
> CONFIG_EAP_AKA=y
> CONFIG_EAP_PSK=y
> CONFIG_EAP_LEAP=y
> CONFIG_PCSC=y
> -------------------------------------------
> 
> 
> Makefile reference to MADWIFI:
> -------------------------------------------
> ifdef CONFIG_DRIVER_MADWIFI
> CFLAGS += -DCONFIG_DRIVER_MADWIFI
> CFLAGS += -I../madwifi/wpa              # change to
> reflect local setup
> OBJS += driver_madwifi.o
> CONFIG_WIRELESS_EXTENSION=y
> endif
> -------------------------------------------
> 
> 
> 
> And here is what I get when I "make":
> -------------------------------------------
> 
> #make
> cc -MMD -O2 -Wall -g -I../driver/modules -I../utils
> -I../hostapd -DCONFIG_DRIVER_MADWIFI
> -I../madwifi/wpa 
>               -DEAP_TLS -DEAP_PEAP -DEAP_TTLS
> -DEAP_MD5 -DEAP_MSCHAPv2 -DEAP_GTC -DEAP_OTP
> -DEAP_SIM
> -DEA
> P_LEAP -DIEEE8021X_EAPOL -DEAP_TLS_FUNCS
> -DCONFIG_WIRELESS_EXTENSION   -c -o driver_madwifi.o
> driver_madwifi.c
> driver_madwifi.c:28:28: warning: include/compat.h:
> No
> such file or directory
> driver_madwifi.c:29:32: warning:
> net80211/ieee80211.h:
> No such file or directory
> driver_madwifi.c:30:39: warning:
> net80211/ieee80211_crypto.h: No such file or
> directory
> driver_madwifi.c:31:38: warning:
> net80211/ieee80211_ioctl.h: No such file or
> directory
> driver_madwifi.c: In function `set80211priv':
> driver_madwifi.c:88: error:
> `IEEE80211_IOCTL_SETPARAM'
> undeclared (first use in this function)
> driver_madwifi.c:88: error: (Each undeclared
> identifier is reported only once
> driver_madwifi.c:88: error: for each function it
> appears in.)
> driver_madwifi.c:89: error:
> `IEEE80211_IOCTL_CHANLIST'
> undeclared (first use in this function)
> driver_madwifi.c: In function `set80211param':
> driver_madwifi.c:111: error:
> `IEEE80211_IOCTL_SETPARAM' undeclared (first use in
> this function)
> driver_madwifi.c: In function
> `wpa_driver_madwifi_set_wpa_ie':
> driver_madwifi.c:167: error:
> `IEEE80211_IOCTL_SETOPTIE' undeclared (first use in
> this function)
> driver_madwifi.c: In function
> `wpa_driver_madwifi_set_wpa':
> driver_madwifi.c:183: error:
> `IEEE80211_PARAM_ROAMING'
> undeclared (first use in this function)
> driver_madwifi.c:185: error:
> `IEEE80211_PARAM_PRIVACY'
> undeclared (first use in this function)
> driver_madwifi.c:187: error: `IEEE80211_PARAM_WPA'
> undeclared (first use in this function)
> driver_madwifi.c: In function
> `wpa_driver_madwifi_del_key':
> driver_madwifi.c:196: error: storage size of `wk'
> isn't known
> driver_madwifi.c:202: error: `IEEE80211_ADDR_LEN'
> undeclared (first use in this function)
> driver_madwifi.c:204: error:
> `IEEE80211_IOCTL_DELKEY'
> undeclared (first use in this function)
> driver_madwifi.c:196: warning: unused variable `wk'
> driver_madwifi.c: In function
> `wpa_driver_madwifi_set_key':
> driver_madwifi.c:213: error: storage size of `wk'
> isn't known
> driver_madwifi.c:223: error: `IEEE80211_CIPHER_WEP'
> undeclared (first use in this function)
> driver_madwifi.c:227: error: `IEEE80211_CIPHER_TKIP'
> undeclared (first use in this function)
> driver_madwifi.c:231: error:
> `IEEE80211_CIPHER_AES_CCM' undeclared (first use in
> this function)
> driver_madwifi.c:256: error: `IEEE80211_KEY_RECV'
> undeclared (first use in this function)
> driver_madwifi.c:258: error: `IEEE80211_KEY_XMIT'
> undeclared (first use in this function)
> driver_madwifi.c:258: error: `IEEE80211_KEY_DEFAULT'
> undeclared (first use in this function)
> driver_madwifi.c:259: error: `IEEE80211_ADDR_LEN'
> undeclared (first use in this function)
> driver_madwifi.c:267: error:
> `IEEE80211_IOCTL_SETKEY'
> undeclared (first use in this function)
> driver_madwifi.c:213: warning: unused variable `wk'
> driver_madwifi.c: In function
> `wpa_driver_madwifi_set_countermeasures':
> driver_madwifi.c:274: error:
> `IEEE80211_PARAM_COUNTERMEASURES' undeclared (first
> use in this function)
> driver_madwifi.c: In function
> `wpa_driver_madwifi_set_drop_unencrypted':
> driver_madwifi.c:282: error:
> `IEEE80211_PARAM_DROPUNENCRYPTED' undeclared (first
> use in this function)
> driver_madwifi.c: In function
> `wpa_driver_madwifi_deauthenticate':
> driver_madwifi.c:288: error: storage size of `mlme'
> isn't known
> driver_madwifi.c:291: error: `IEEE80211_MLME_DEAUTH'
> undeclared (first use in this function)
> driver_madwifi.c:293: error: `IEEE80211_ADDR_LEN'
> undeclared (first use in this function)
> driver_madwifi.c:294: error:
> `IEEE80211_IOCTL_SETMLME'
> undeclared (first use in this function)
> driver_madwifi.c:288: warning: unused variable
> `mlme'
> driver_madwifi.c: In function
> `wpa_driver_madwifi_disassociate':
> driver_madwifi.c:300: error: storage size of `mlme'
> isn't known
> driver_madwifi.c:303: error:
> `IEEE80211_MLME_DISASSOC'
> undeclared (first use in this function)
> driver_madwifi.c:305: error: `IEEE80211_ADDR_LEN'
> undeclared (first use in this function)
> driver_madwifi.c:306: error:
> `IEEE80211_IOCTL_SETMLME'
> undeclared (first use in this function)
> driver_madwifi.c:300: warning: unused variable
> `mlme'
> driver_madwifi.c: In function
> `wpa_driver_madwifi_associate':
> driver_madwifi.c:318: error: storage size of `mlme'
> isn't known
> driver_madwifi.c:337: error: `IEEE80211_MLME_ASSOC'
> undeclared (first use in this function)
> driver_madwifi.c:338: error: `IEEE80211_ADDR_LEN'
> undeclared (first use in this function)
> driver_madwifi.c:339: error:
> `IEEE80211_IOCTL_SETMLME'
> undeclared (first use in this function)
> driver_madwifi.c:318: warning: unused variable
> `mlme'
> make: *** [driver_madwifi.o] Error 1
> #
> 
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam
> protection around 
> http://mail.yahoo.com 
> _______________________________________________
> HostAP mailing list
> HostAP at shmoo.com
> http://lists.shmoo.com/mailman/listinfo/hostap
> 

__________________________________
Do you Yahoo!?
Yahoo! Mail Address AutoComplete - You start. We finish.
http://promotions.yahoo.com/new_mail 