IPW2100 and "Failed to set PTK to the driver"
mbuchhol at eu.uu.net
mbuchhol
Sun Nov 28 04:26:00 PST 2004
Hi,
I have the Debian (Sarge) Kernel 2.6.6 with the IPW-Driver 1.0.1 and
wpa_supplicant-0.2.5
I use this configfile:
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
eapol_version=1
ap_scan=1
network={
ssid="UUnet"
key_mgmt=WPA-EAP
proto=WPA
pairwise=TKIP
group=TKIP
eap=PEAP
identity="logname"
password="password"
phase1="peapver=0"
phase2="auth=MSCHAPV2"
priority=2
}
This is the last message, before it starts over again:
WPA: Sending EAPOL-Key 4/4
WPA: TX EAPOL-Key 4/4 - hexdump(len=113): 00 07 eb 30 ed 3c 00 04 23 91
15 7c 88 8e 01 03 00 5f fe 01 09 00 20 00 00 00 00 00 00 00 02 28 68 31
36 b8 c6 5e d0 7 4 1e 7f 32 7d 8e 3b ac b8 ec 54 f1 fe 0f 38 b4 5b 26 85
9d 81 9f 19 22 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 e8 20 17 89 21 1e 70 f5 4e 46 31
ec 26 db 2c 67 00 00 WPA: Installing PTK to the driver.
WPAioctl[IPW2100_IOCTL_WPA_SUPPLICANT]: Invalid argument
: RSC - hexdump(len=6): 00 00 00 00 00 00
wpa_driver_ipw2100_set_key: alg=TKIP key_idx=0 set_tx=1 seq_len=6
key_len=32 Failed to set encryption.
WPA: Failed to set PTK to the driver.
I also found and activated encryption in the IPW-Driver's Makefile:
# If you do not want any encryption/decryptoin code in the driver,
# comment out this line:
CONFIG_IEEE80211_CRYPT=$(CONFIG_IEEE80211)
What have i forgotten to enable, define or install?
I have absolutely no clue and my manager wants to use my Notebook for a
presentation (that it works with Linux too) for a customer next
Thursday.
I already scanned the Mailing-List Archive, but could not find anything,
that matches.
Any help is welcome.
Thank you
--
mit freundlichen Gruessen / with friendly regards
Michael Buchholz MCI Group Office: +49 231 9721192
Sebrathweg 20 Home-Office: +49 231 9479858
MSAS Support 44149 Dortmund, Germany Fax...: +49 231 9722508
More information about the Hostap
mailing list