madwifi(cvs), wpa_supp v0.2.5 and linksys router problem

[Andreas Schuldei]

* Jouni Malinen (jkmaline at cc.hut.fi) [041122 03:08]:
> On Mon, Nov 22, 2004 at 01:30:48AM +0100, Andreas Schuldei wrote:
> 
> > Again i experience problems with wpa from my notebook with the
> > newest madwifi driver from cvs (atheos hardware), my wrt54g
> > linksys router (new broadcom binary drivers) with sveasoft
> > alchemy-6.0-rc1.w42 firmware
> 
> I tried to reproduce this with same configuration using CVS version of
> madwifi and Satori-4.0 v2.07.1.7sv firmware on WRT54G. However,
> everything seemed to work fine with WPA-PSK/CCMP..
> 
> Which version of the Broadcom driver is used in the firmware you are
> using? You can get this information with 'wl ver'. The one I used has
> following version information:
> 
> (none):[~]# wl ver
> wl:     3.50 RC21.10
>         wl0: Jan 21 2004 20:53:00 version 3.50.21.10

wl: 3.60 RC13.0
 wl0: Aug 2 2004 14:32:51 version 3.60.13.0

the troubles started when sveasofts firmware moved away from the
satori firmware. they say the new firmware did not allow some
bogus connection modes anymore.

> 
> Is alchemy-6.0-rc1.w42 firmware available somewhere for testing? I would
> need at least wl.o and nas binaries to be able to reproduce the same
> test setup.

i asked exactly that question beforehand. i understand *you* can
get it from them for testing (c:
mail them to info at sveasoft.com to obtain one. 

i will follow up on my old thread in the forum to raise my
concernes.