SWSUPPORT write/read failed

[Jouni Malinen]

On Tue, Nov 02, 2004 at 07:58:01PM +0100, Simon Kagstrom wrote:

> I'm trying to understand why the Sandisk Connectplus card doesn't work. One
> thing which I don't understand is why the write to SWSUPPORT0 isn't working. I
> get results as
> 
> SWSUPPORT0 write/read failed: 8AFF != 8A32

It is unclear whether the registers are mapped correctly since init
command fails and SWSUPPORT0 reigster does not work properly. Has the
patch for the multi-func card fixed to make sure that COR is set
correctly to get the card in I/O mode?

> should the SWSUPPORT0 write work if the card isn't configured properly before
> (especially the "Interrupt, but dev not OK" looks suspicious).

Depends on what part is not configured properly.. It is available quite
soon, but at least the registers have to match and the card may need
some setup (e.g., that COR mentioned above).

> Are there any parts of the prism3 support still missing by the way?

Should not be missing.

-- 
Jouni Malinen                                            PGP id EFC895FA