update sta fw to 1.8.3 failed

[Sergey Basmanov]

Jouni Malinen wrote:

>On Tue, May 25, 2004 at 12:44:42PM +0300, Sergey Basmanov wrote:
>
>  
>
>>Plugging PDR 0x0413 at 0x0000118a (len=2)
>>Could not find data position for plugging PDR 0x0413 at 0x0000118a (len=2)
>>Incompatible update data.
>>    
>>
>
>Which version of prism2_srec are you using? Please try the latest
>  
>
0.1.3 stable

>development snapshot which should ignore PDRs that point outside the
>normal memory area.
>
>  
>
Ok. Just tested with 0.2.1:

Plugging PDR 0x0413 at 0x0000118a (len=2)
Could not find data position for plugging PDR 0x0413 at 0x0000118a (len=2)
PDR 0x0413 is not in wlan card PDA and there is no default data. 
Ignoring plug record.
Plugging PDR 0x0414 at 0x007ee5a0 (len=36)
PDR 0x0414 not found from wlan card PDA. Using default data.
  len=36: 36 00 36 00 36 00 04 00 01 00 03 00 3b 00 3b 00 40 00 06 00 01 
00 03 00 40 00 40 00 4a 00 08 00 01 00 03 00
Generating CRC-16 (start=0x007e1800, len=65536) at 0x007e17fe
OK.

Host AP driver diagnostics information for 'wlan0'

NICID: id=0x8013 v1.0.0 (PRISM II (2.5) Mini-PCI (SST parallel flash))
PRIID: id=0x0015 v1.1.1
STAID: id=0x001f v1.7.4 (station firmware)

Seems that nothing happens. Or hostap_diag reads data stored in flash?
Correct me if I'm wrong, but afaik rf010803.hex is for RAM download.

Thanks.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/hostap/attachments/20040525/ea034098/attachment.htm