Pebble v.41 (hostap v 0.1.3) + Soekris 4511 + Senao CD2511+EXT2

[Doron Nissimi]

Hi Folks,

I am having trouble getting this combination of hardware to work...
I have installed the 'Pebble' distro using option 3 (net4511/4521).

When I type iwconfig I get:
---
Warning: Driver for device wlan0 has been compiled with version 16
of Wireless Extension, while this program is using version 15.
Some things may be broken...

wlan0     IEEE 802.11-DS  ESSID:"FreeNetworks.Org"
          Mode:Master
          Encryption key:off
          Link Quality:0  Signal level:0  Noise level:0
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0
---

 ifconfig -a gives:
---
wlan0     Link encap:Ethernet  HWaddr 00:00:00:00:00:00
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Base address:0x100
---

dmesg gives:
---
wlan0: hfa384x_cmd: entry still in list? (entry=c3cab6a0, type=0, res=0)
wlan0: hfa384x_cmd: command was not completed (res=0, entry=c3cab6a0, type=0, cmd=0x0021, param0=0xfdc6, EVSTAT=0000 INTEN=0000)
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fdc6, len=12)
wlan0: hfa384x_cmd: entry still in list? (entry=c3cab6a0, type=0, res=0)
wlan0: hfa384x_cmd: command was not completed (res=0, entry=c3cab6a0, type=0, cmd=0x0021, param0=0xfdc6, EVSTAT=0000 INTEN=0000)
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fdc6, len=12)
wlan0: hfa384x_cmd: entry still in list? (entry=c3cab6a0, type=0, res=0)
wlan0: hfa384x_cmd: command was not completed (res=0, entry=c3cab6a0, type=0, cmd=0x0021, param0=0xfdc1, EVSTAT=0000 INTEN=0000)
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fdc1, len=2)
wlan0: hfa384x_cmd: entry still in list? (entry=c3cab6a0, type=0, res=0)
wlan0: hfa384x_cmd: command was not completed (res=0, entry=c3cab6a0, type=0, cmd=0x0021, param0=0xfc06, EVSTAT=0000 INTEN=0000)
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fc06, len=2)
wlan0: hfa384x_cmd: entry still in list? (entry=c3cab6a0, type=0, res=0)
wlan0: hfa384x_cmd: command was not completed (res=0, entry=c3cab6a0, type=0, cmd=0x0021, param0=0xfd42, EVSTAT=0000 INTEN=0000)
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd42, len=6)
wlan0: hfa384x_cmd: entry still in list? (entry=c3cab6e0, type=0, res=0)
wlan0: hfa384x_cmd: command was not completed (res=0, entry=c3cab6e0, type=0, cmd=0x0021, param0=0xfc0e, EVSTAT=0000 INTEN=0000)
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fc0e, len=34)
wlan0: hfa384x_cmd: entry still in list? (entry=c3cab6a0, type=0, res=0)
wlan0: hfa384x_cmd: command was not completed (res=0, entry=c3cab6a0, type=0, cmd=0x0021, param0=0xfc84, EVSTAT=0000 INTEN=0000)
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fc84, len=2)
wlan0: hfa384x_cmd: entry still in list? (entry=c3cab6a0, type=0, res=0)
wlan0: hfa384x_cmd: command was not completed (res=0, entry=c3cab6a0, type=0, cmd=0x0021, param0=0xfc83, EVSTAT=0000 INTEN=0000)
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fc83, len=2)
wlan0: hfa384x_cmd: entry still in list? (entry=c3cab6a0, type=0, res=0)
wlan0: hfa384x_cmd: command was not completed (res=0, entry=c3cab6a0, type=0, cmd=0x0021, param0=0xfc82, EVSTAT=0000 INTEN=0000)
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fc82, len=2)
wlan0: hfa384x_cmd: entry still in list? (entry=c3cab6a0, type=0, res=0)
wlan0: hfa384x_cmd: command was not completed (res=0, entry=c3cab6a0, type=0, cmd=0x0021, param0=0xfc09, EVSTAT=0000 INTEN=0000)
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fc09, len=2)
wlan0: hfa384x_cmd: entry still in list? (entry=c3cab6a0, type=0, res=0)
wlan0: hfa384x_cmd: command was not completed (res=0, entry=c3cab6a0, type=0, cmd=0x0021, param0=0xfd48, EVSTAT=0000 INTEN=0000)
---

..  and if I try to re-initialize 'networking'  I get the following errors:
---
wlan0: MAC port 0 enabling failed
wlan0: could not enable MAC port
SIOCSIFFLAGS: No such device
---

Some people have suggested setting irq_mode=0 to the PCIC_OPTS within /etc/default/pcmcia, though when I try this, it does not initialize PCMCIA services at all.

Anyway...  Those are my troubles :(
Any help would be greatly appreciated!

Thanks,
Doron
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/hostap/attachments/20040513/0d87e662/attachment.htm