PATCH: Accounting Gigawords

[Gunter Burchardt]

> I would prefer not to use long long in the driver for these counters.
> hostapd should be able to notice the roll over and have another variable
> for counting these. This would even match the RADIUS messages better,
> since the gigawords attribute seems to be this roll over counter.. No
> need to combine the numbers into a 64-bit counter anywhere in the driver
> or hostapd..

Ok - I did it this way.

> > +	{ RADIUS_ATTR_ACCT_OUTPUT_GIGAWORDS, "Acct-output-Gigawords",
> output -> Output (?)

fixed

regards
gunter
-------------- next part --------------
diff -Nur hostap.old/hostapd/accounting.c hostap/hostapd/accounting.c
--- hostap.old/hostapd/accounting.c	2004-06-17 06:28:44.000000000 +0200
+++ hostap/hostapd/accounting.c	2004-07-14 08:58:34.000000000 +0200
@@ -235,18 +235,42 @@
 			printf("Could not add Acct-Output-Packets\n");
 			goto fail;
 		}
+		if (sta->rx_bytes > data.rx_bytes)
+			sta->rx_gigawords++;
+		if (sta->tx_bytes > data.tx_bytes)
+			sta->tx_gigawords++;
+		sta->rx_bytes = data.rx_bytes;
+		sta->tx_bytes = data.tx_bytes;
 		if (!radius_msg_add_attr_int32(msg,
 					       RADIUS_ATTR_ACCT_INPUT_OCTETS,
 					       data.rx_bytes)) {
 			printf("Could not add Acct-Input-Octets\n");
 			goto fail;
 		}
+		if(sta->rx_gigawords)
+		{
+			if (!radius_msg_add_attr_int32(msg,
+						       RADIUS_ATTR_ACCT_INPUT_GIGAWORDS,
+						       sta->rx_gigawords)) {
+				printf("Could not add Acct-Input-Gigawords\n");
+				goto fail;
+			}
+    	}
 		if (!radius_msg_add_attr_int32(msg,
 					       RADIUS_ATTR_ACCT_OUTPUT_OCTETS,
 					       data.tx_bytes)) {
 			printf("Could not add Acct-Output-Octets\n");
 			goto fail;
 		}
+ 		if(sta->tx_gigawords)
+		{
+			if (!radius_msg_add_attr_int32(msg,
+						       RADIUS_ATTR_ACCT_OUTPUT_GIGAWORDS,
+						       sta->tx_gigawords)) {
+				printf("Could not add Acct-Output-Gigawords\n");
+				goto fail;
+			}
+		}
 	}
 
 	if (eloop_terminated())
diff -Nur hostap.old/hostapd/ap.h hostap/hostapd/ap.h
--- hostap.old/hostapd/ap.h	2004-06-21 04:53:40.000000000 +0200
+++ hostap/hostapd/ap.h	2004-07-14 08:45:30.000000000 +0200
@@ -49,6 +49,11 @@
 	int acct_terminate_cause; /* Acct-Terminate-Cause */
 	int acct_interim_interval; /* Acct-Interim-Interval */
 
+	unsigned long rx_bytes;
+	unsigned long rx_gigawords;
+	unsigned long tx_bytes;
+	unsigned long tx_gigawords;
+
 	u8 *challenge; /* IEEE 802.11 Shared Key Authentication Challenge */
 
 	int pairwise; /* Pairwise cipher suite, WPA_CIPHER_* */
diff -Nur hostap.old/hostapd/radius.c hostap/hostapd/radius.c
--- hostap.old/hostapd/radius.c	2004-07-08 06:11:17.000000000 +0200
+++ hostap/hostapd/radius.c	2004-07-14 08:30:38.000000000 +0200
@@ -163,6 +163,10 @@
 	{ RADIUS_ATTR_ACCT_MULTI_SESSION_ID, "Acct-Multi-Session-Id",
 	  RADIUS_ATTR_TEXT },
 	{ RADIUS_ATTR_ACCT_LINK_COUNT, "Acct-Link-Count", RADIUS_ATTR_INT32 },
+	{ RADIUS_ATTR_ACCT_INPUT_GIGAWORDS, "Acct-Input-Gigawords", 
+	  RADIUS_ATTR_INT32 },
+	{ RADIUS_ATTR_ACCT_OUTPUT_GIGAWORDS, "Acct-Output-Gigawords",
+	  RADIUS_ATTR_INT32 },
 	{ RADIUS_ATTR_NAS_PORT_TYPE, "NAS-Port-Type", RADIUS_ATTR_INT32 },
 	{ RADIUS_ATTR_CONNECT_INFO, "Connect-Info", RADIUS_ATTR_TEXT },
 	{ RADIUS_ATTR_EAP_MESSAGE, "EAP-Message", RADIUS_ATTR_UNDIST },
diff -Nur hostap.old/hostapd/radius.h hostap/hostapd/radius.h
--- hostap.old/hostapd/radius.h	2004-07-08 06:11:17.000000000 +0200
+++ hostap/hostapd/radius.h	2004-07-14 08:32:38.000000000 +0200
@@ -56,6 +56,8 @@
        RADIUS_ATTR_ACCT_TERMINATE_CAUSE = 49,
        RADIUS_ATTR_ACCT_MULTI_SESSION_ID = 50,
        RADIUS_ATTR_ACCT_LINK_COUNT = 51,
+       RADIUS_ATTR_ACCT_INPUT_GIGAWORDS=52,
+       RADIUS_ATTR_ACCT_OUTPUT_GIGAWORDS=53,
        RADIUS_ATTR_NAS_PORT_TYPE = 61,
        RADIUS_ATTR_CONNECT_INFO = 77,
        RADIUS_ATTR_EAP_MESSAGE = 79,