D-Link 650P - getting closer

[Jouni Malinen]

On Wed, Jan 07, 2004 at 11:03:39AM +0100, Martin Whitlock wrote:

> [pxadmin at px30_0101 /root]$./prism2_srec -gip wlan0 PM010102.HEX
> srec summary for PM010102.HEX
> Component: 0x0015 1.1.2 (primary firmware)

> Incompatible interfaces:
>  SREC: role=Actor    variant=2 range=1-1 iface=Controller-Firmware (2)
>  card: role=Supplier variant=0 range=1-1 iface=Controller-Firmware (2)
> Ignoring incompatibility

This is probably OK. The card RID is read using unplugged PRI f/w and
the compatibility range RIDs may not be correct at that point. Since the
PRI f/w seemed to start correctly, I would not expect any major issues
with this.

> [pxadmin at px30_0101 /root]$./prism2_srec -rp wlan0 RF010802.HEX
> srec summary for RF010802.HEX
> Component: 0x001f 1.8.2 (station firmware)

> Verifying update compatibility and combining data:
> Could not find data position for plugging PDR 0x0413 at 0x0000118a (len=2)
> Incompatible update data.

I needed to remove the PDR 0x0413 line from RF010802.HEX to get it
working.. I don't know why that record is trying to plug such an odd
address. prism2_srec is not able to handle it and I would rather not
change prism2_srec to skip it before actually understanding what that
plug record is supposed to really do. The line you would need to remove
is about line number 3855 and starts with S311FF00000013040000.

-- 
Jouni Malinen                                            PGP id EFC895FA