hostap_cs.conf

[Jouni Malinen]

On Thu, Feb 19, 2004 at 02:59:21PM -0500, Andrea G. Forte wrote:

> I have updated the kernel to 2.4.18 and used HostAP 0.1.12.
> When I use the HostAP driver I get a lot of errors in dmesg, the following
> is the beginning of the errors in dmesg:

Could you please test this again without first loading linux-wlan-ng
driver? I would also need to get the addresses from the oops resolved to
symbols. Any change that you could pipe it through ksymoops? If not, I
would need to get System.map and vmlinux from the kernel build tree and
the Host AP modules (hostap*.o) and contents of /proc/ksyms and
/proc/modules from the system to be able to resolve the symbols myself


> We also installed hostap 0.0.4 using the kernel 2.4.6 and everything
> seemed to work. The only problem is that it would not connect to any AP
> when in Managed mode and it would not work as AP in Master mode...we could
> not see it when scanning.
> We noticed that the WCF11 works fine if ANY is selected as essid and it
> gives some problems if the essid is specified. Could this be the problem
> (since hostAP does not support ANY as essid)? How could we fix this?

Is this ANY SSID comment only about 0.0.4 and 0.1.2 just crashes?

-- 
Jouni Malinen                                            PGP id EFC895FA