(no subject)

[Kalyan Ram Chintalapati]

Gurus,

Sorry for spamming! But, thought giving you the complete "dmesg" output 
would help.

I'm using a D-Link DWL-650 Air RevP and SuSE 9.0 with 2.4.21-166. I've
downloaded hostap-driver-0.1.3.tar.gz over the weekend and tried to install 
the same.

The driver "make"s fine. But, when I say make install, I get messages like:

Here is the exact "dmesg" report:
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0820-0x08ff: clean.
cs: IO port probe 0x0800-0x080f: clean.
cs: IO port probe 0x03e0-0x04ff: excluding 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x0100-0x03af: excluding 0x200-0x2070x220-0x22f 
0x330-0x337 0x388-0x38f
cs: IO port probe 0x0a00-0x0aff: clean.
hostap_cs: setting Vcc=33 (constant)
hostap_cs: CS_EVENT_CARD_INSERTION
prism2_config()
hostap_cs: setting Vcc=50 (from config)
Checking CFTABLE_ENTRY 0x01 (default 0x01)
IO window settings: cfg->io.nwin=1 dflt.io.nwin=1
io->flags = 0x0047, io.base=0x0000, len=128
hostap_cs: index 0x01: Vcc 5.0, irq 3, io 0x0880-0x08ff
hostap_cs: Registered netdevice wlan0
prism2_hw_init()
hostap_cs: card initialization timed out
wlan0 unsupported ioctl(0x8946)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0xa401
wlan0: hfa384x_cmd: entry still in list? (entry=c3dbc420, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fdc6, len=12)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0xa401
wlan0: hfa384x_cmd: entry still in list? (entry=c3dbc420, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed(res=-110, rid=fdc6, len=12)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0xa401
wlan0: hfa384x_cmd: entry still in list? (entry=c3dbc420, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fdc1, len=2)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0xa401
wlan0: hfa384x_cmd: entry still in list? (entry=c3dbc420, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fc06, len=2)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0xa401
wlan0: hfa384x_cmd: entry still in list? (entry=c3dbc420, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd42, len=6)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0xa401
wlan0: hfa384x_cmd: entry still in list? (entry=c3dbc360, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fc0e, len=34)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0xa401
wlan0: hfa384x_cmd: entry still in list? (entry=c3dbc420, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fc84, len=2)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0xa401
wlan0: hfa384x_cmd: entry still in list? (entry=c3dbc360, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fc83, len=2)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0xa401
wlan0: hfa384x_cmd: entry still in list? (entry=c3dbc320, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fc82, len=2)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0xa401
wlan0: hfa384x_cmd: entry still in list? (entry=c3dbc420, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fc09, len=2)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0xa401
wlan0: hfa384x_cmd: entry still in list? (entry=c3dbc360, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd48, len=2)
wlan0 unsupported ioctl(0x89f1)
prism2: wlan0: operating mode changed 3 -> 2
wlan0: hfa384x_setup_bap - timeout after
wlan0: hfa384x_set_rid (rid=fc00, len=2) - failed - res=-110
wlan0: hfa384x_setup_bap - timeout before
wlan0: hfa384x_set_rid (rid=fc0e, len=34) - failed - res=-110
hostap_crypt: registered algorithm 'WEP'
wlan0: hfa384x_cmd_issue: cmd reg was busy for 5000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0xe953
wlan0: hfa384x_cmd: entry still in list?(entry=c3dbcc60, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fc28, len=2)
Could not read current WEP flags.
wlan0: encryption setup failed
wlan0: set_encryption failed
wlan0: hfa384x_setup_bap - timeout before
wlan0: hfa384x_set_rid (rid=fc02, len=34) - failed - res=-110

Can anyone enlighten me on what the potential problem here is and how I
can fix it (If I can)?

Thanks in advance,
Kalyan