802.1x-MD5 test faild

[warren]

Hi,
    Yes, it won't time out after set eapol_flags=0. Thanks.
    But if I do a ping test from the client side to the AP side,
    it will fail. Then the AP's log said that the client send unencrypt
    packets, so the AP discard the packets.
    Are there anything else need to do in the driver settings ?
    I'm using madwifi driver.

Regards,
Wayne.

----- Original Message -----
From: "Jouni Malinen" <jkmaline at cc.hut.fi>
To: <hostap at shmoo.com>
Sent: Friday, December 10, 2004 1:27 PM
Subject: Re: 802.1x-MD5 test faild


> On Fri, Dec 10, 2004 at 01:19:19PM +0800, warren wrote:
>
> > I've got a trouble testing 802.1x. The connection is always failed.
> > I use AiroPeek to sniffer the wireless packet and found that
> > AP already sent EAP-Success to the client.
> > But the client does not think it's authorized and then sent
"Disassociation"
> > to the AP.
>
> You will need to set eapol_flags=0 when using IEEE 802.1X without
> dynamic WEP keying. The default is to require both unicast and broadcast
> key information which will make the connection time out in this case.
>
> --
> Jouni Malinen                                            PGP id EFC895FA
> _______________________________________________
> HostAP mailing list
> HostAP at shmoo.com
> http://lists.shmoo.com/mailman/listinfo/hostap
>
>
> ==========================================================
>  ???z?k?O???K??????
>  http://edm-prg.epaper.com.tw/click.php?ad_code=282824
> ==========================================================
>  SkypeOut ?????[0.7??/??  ???j??0.9??/??  ???Y???R>>
>  http://skype.pchome.com.tw/skypeout.htm
> ==========================================================