wpa_supplicant

[calloway at cs.utk.edu]

I'm trying to get WPA to
work with an orinoco gold card
on a Redhat RHEL3 WS box using
ndiswrapper with the agere drivers.
The card is recognized by the OS
as eth1. When I try to do:

 	wpa_supplicant -dd -ieth1 -cwpa_supplicant.conf I get:

ioctl[SIOCSIWSCAN]: Operation not supported
ioctl[SIOCGIWSCAN]: Operation not supported
Configuration file 'wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
Line: 1 - start of a new network block
SSID - hexdump_ascii(len=7):
      6f 72 6e 6c 77 70 61                              ornlwpa
key_mgmt: 0x1
Priority group 0
    id=0 ssid='mywpa'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Setting scan request: 0 sec 100000 usec
Starting AP scan (broadcast SSID)
Failed to initiate AP scan.
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
Scan timeout - try to get results
Scan results: -1
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=0 idleWhile=0
Signal 2 received - terminating
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0

Has anyone had any luck with this card and a similar
version of Linux. I'm a newbie to this so any help/advice
is appreciated. This is wpa_supplicant 0.2.5 and I
loaded the drivers for XP using ndiswrapper.