No WPA/RSN IE in association request

[Project 2k4]

Jouni Malinen wrote:
> On Mon, Dec 06, 2004 at 03:47:31PM +0100, Project 2k4 wrote:
> 
> Which client driver and version are you using?

My client driver seems to be a stock driver available from the OEM
manufacturer of the PCMCIA card. It's simply called IEEE 802.11b WLAN
network adapter PC Card Version 8.00.02

Driver file is called WLANNDS.sys and I post it at:
http://www.confero24.com/jonnas/

>>I can auth correctly using WPA-PSK by setting wpa_key_mgmt=WPA-PSK, and 
>>accordingly providing wpa_passphrase=somestring. No prob obtaining DHCP 
>>address and pinging between AP-client.
>>
>>But trying to setup wpa_key_mgmt=WPA-PSK WPA-EAP, in order to 
>>authenticate using PEAP & WPA/TLS (freeradius) fails, repeatedly 
>>scrolling across screen (hostapd -d /etc/hostapd.conf):
> 
> 
> I would recommend first testing whether a simpler setup with
> wpa_key_mgmt=WPA-EAP and wpa=1 works. Some clients may not like both PSK
> and EAP being enabled at the same time and WPA2 has confused some
> clients, too. Likewise, I would start with just one pairwise cipher,
> i.e., wpa_pairwise=TKIP.

Regards
Jonnas