WPA_Supplicant Looping when authenticated (EAP_PEAP)

[Normax]

On Thursday 29 April 2004 01:09, hostap-request at shmoo.com wrote:
> Send HostAP mailing list submissions to
> 	hostap at shmoo.com
>I tested the new cvs with xsupplicant this AM briefly, same problem. looping 
on authentication. Also tested WPA_Supplicant using internal 802.1x...
The results are below , also see attached trace from ethereal.
All of these tests were done hurriedly, I will recheck my setup as soon as I 
can.

Thanks 

Normax

EAPOL: SUPP_BE entering state IDLE
Wireless event: cmd=0x8c00 len=20
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=29 idleWhile=29
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=28 idleWhile=28
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=27 idleWhile=27
Starting AP scan (broadcast SSID)
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=26 idleWhile=26
Wireless event: cmd=0x8b19 len=12
Received 491 bytes of scan results (2 BSSes)
Scan results: 2
0: 00:0d:88:9f:66:8d ssid='wanlan' wpa_ie_len=24 rsn_ie_len=0
1: 00:e0:98:b7:13:d7 ssid='rosum' wpa_ie_len=26 rsn_ie_len=0
Already associated with the selected AP.
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=25 idleWhile=25
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=24 idleWhile=24
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=23 idleWhile=23
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=22 idleWhile=22
Starting AP scan (broadcast SSID)
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=21 idleWhile=21
Wireless event: cmd=0x8b19 len=12
Received 491 bytes of scan results (2 BSSes)
Scan results: 2
0: 00:0d:88:9f:66:8d ssid='wanlan' wpa_ie_len=24 rsn_ie_len=0
1: 00:e0:98:b7:13:d7 ssid='rosum' wpa_ie_len=26 rsn_ie_len=0
Already associated with the selected AP.
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=20 idleWhile=20
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=19 idleWhile=19
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=18 idleWhile=18
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=17 idleWhile=17
Starting AP scan (broadcast SSID)
EAPOL: Port Timers tick - authWhile=0 heldWhile=0 startWhen=16 idleWhile=16
Wireless event: cmd=0x8b19 len=12

etc....
-------------- next part --------------
A non-text attachment was scrubbed...
Name: eap.ethdump
Type: application/octet-stream
Size: 4116 bytes
Desc: not available
Url : http://lists.shmoo.com/pipermail/hostap/attachments/20040429/202c06c1/attachment.obj