Problem with hostap_plx 0.1.3 and 2.6.6-rc3 with pheenet card

[Ruben Puettmann]

On Wed, Apr 28, 2004 at 04:18:33PM +0200, oldfrog.hostap wrote:
> Ruben Puettmann wrote:
> 
> >>I can't see any error... There is no error
> >>if module is loaded properly . Send output of
> >>'lsmod' and 'iwconfig' commands.
> >>
> >Oh one line is missing soory ...
> >
> >hostap_plx: 0.1.3 - 2004-02-08 (Jouni Malinen <jkmaline at cc.hut.fi>)
> >PCI: Found IRQ 5 for device 0000:00:0e.0
> >TMD7160 PCI/PCMCIA adapter: io=0xeff4, irq=5, pccard_io=0x1000
> >hostap_plx: Error setting COR (expected=0x45, was=0xff)
> >               ruben
> >
> 
> I see one error now...  ;-) So insmod of 'hostap_plx'
> module failed? Which version of pcmcia drivers do you
> use? Send output of 'lsmod' and 'iwconfig' commands.
> 
No PCMCIA driver it is an PCI Card see the lspci:


0000:00:0e.0 Network controller: National Datacomm Corp: Unknown device
0131 (rev 01)
        Subsystem: National Datacomm Corp: Unknown device 0131
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin A routed to IRQ 5
        Region 1: I/O ports at eff4 [size=16]
        Region 2: I/O ports at 1000 [size=64]


Descripted in the hostap source as :

/* National Datacomm NCP130 based on TMD7160, not PLX9052. */


I user the 2.6.5 kernel source + patch-2.6.6-rc3 + hostap-driver-0.1.3


                        Ruben


-- 
Ruben Puettmann
ruben at puettmann.net
http://www.puettmann.net
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: Digital signature
Url : http://lists.shmoo.com/pipermail/hostap/attachments/20040428/9c42b6e4/attachment.pgp