Problem with WPA-PSK

Ugo Campiglio ugo.campiglio
Mon Apr 19 01:20:46 PDT 2004


Hi,
I sent a message on Friday about a PSK problem but I didnt receive any 
comment.
I send you more detail about my configuration. I made work hostapd 
during some tests a few months ago but now I lost my old config. I am 
using the last CVS tar.gz.
I remind you the problem : I am trying to use Hostapd as access point 
for XP clients. Xp detects a connection. With a sniffer I see that 
hostapd sends the first eapol key but XP does not answer correctly 
(sends an ACK and an EAPOL START instead of the EAPOL Key 2).
I suspect there is a problem in the beacon but I was not able to 
identify it. Here is my configuration file.
If somebody can help me I'd be grateful.
Thanks,
Ugo



interface=wlan0


logger_syslog=-1
logger_syslog_level=1
logger_stdout=-1
logger_stdout_level=-1

debug=2

dump_file=/tmp/hostapd.dump

daemonize=1


##### IEEE 802.11 related configuration 
#######################################

ssid=linux_AP

macaddr_acl=0

# bit 0 = Open System Authentication
# bit 1 = Shared Key Authentication (requires WEP)

##### IEEE 802.1X (and IEEE 802.1aa/D4) related configuration 
#################

ieee8021x=0

minimal_eap=0

eap_message=hello


# EAPOL-Key index workaround (set bit7) for WinXP Supplicant (needed only if
# only broadcast keys are used)
eapol_key_index_workaround=1


#//////// dont really know what index workaround is but I tried 0 and 1 
without any change //////////////////////////////////////////


##### RADIUS configuration 
####################################################
own_ip_addr=10.10.10.166

##### WPA/IEEE 802.11i configuration 
##########################################

# and/or WPA2 (full IEEE 802.11i/RSN):
# bit0 = WPA
# bit1 = IEEE 802.11i/RSN (WPA2)
wpa=1

wpa_key_mgmt=WPA-PSK
wpa_passphrase=12345678
wpa_pairwise=TKIP






More information about the Hostap mailing list