What means "Error 2"?

[Peter]

rebuild your kernel with modversion enabled
run "make pci" if you only need pci-support

regards,
peter


On Sat, 10 Apr 2004 14:31:31 +0200
"Florian Pressler" <florianp at hotmail.com> wrote:

> Hi,
> 
> I try to compile the hostap-drivers (stable 0.1.3) with kernel 2.4.25.
> I only need the pci-version of the driver. I configured the correct 
> kernel-path.
> 
> The output of "make" is the following:
> 
> chello213047014143:/usr/src/hostap-driver-0.1.3# make
> Makefile:38: WARNING: No kernel PCMCIA support found and PCMCIA_PATH
> is not defined
> make -C /usr/src/linux
> SUBDIRS=/usr/src/hostap-driver-0.1.3/driver/modules modules
> make[1]: Entering directory `/usr/src/linux-2.4.25'
> make -C  /usr/src/hostap-driver-0.1.3/driver/modules
> CFLAGS="-D__KERNEL__ -I/usr/src/linux-2.4.25/include -Wall
> -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing
> -fno-common -fomit-frame-pointer -pipe -mpreferred-stack-boundary=2
> -march=i686 -DMODULE -DMODVERSIONS -include
> /usr/src/linux-2.4.25/include/linux/modversions.h" MAKING_MODULES=1
> modules make[2]: Entering directory
> `/usr/src/hostap-driver-0.1.3/driver/modules' make[2]: *** No rule to
> make target `/usr/src/linux-2.4.25/include/linux/modversions.h',
> needed by `hostap.o'.  Stop.
> make[2]: Leaving directory
> `/usr/src/hostap-driver-0.1.3/driver/modules' make[1]: ***
> [_mod_/usr/src/hostap-driver-0.1.3/driver/modules] Error 2 make[1]:
> Leaving directory `/usr/src/linux-2.4.25' make: *** [2.4] Error 2
> 
> Could someone tell me what this error means and how I can circumvent
> the problem?
> 
> Thanks,
> Florian
> 
> _________________________________________________________________
> So k?nnen Sie zu jeder Zeit die besten Suchfunktionen nutzen - die MSN
> Toolbar. http://toolbar.msn.at?DI=1031&XAPID=2083
> 
> _______________________________________________
> HostAP mailing list
> HostAP at shmoo.com
> http://lists.shmoo.com/mailman/listinfo/hostap