wlan0: SW TICK stuck

[Christopher Evans]

The only trouble is, I get this output

srec summary for pm010101.hex
Included file name: pm010101.hex
Component: 0x0015 1.1.1 (primary firmware)
Supported platforms:
   0x800e 1.0.0,  0x8015 1.0.0,  0x8019 1.0.0,  0x801d 1.0.0,  0x8024 
1.0.0
Separate S3 data areas:
   addr 0x007E0000..0x007E092F (len 2352)
   addr 0x007E0A00..0x007E13D7 (len 2520)
   addr 0x007E17FE..0x007E17FF (len 2)
Total data length: 4874 bytes
Start address 0x003f0000

Wireless LAN card information:
Components:
   NICID: 0x8013 v1.0.0
   PRIID: 0x0015 v1.0.7
   STAID: 0x001f v1.7.4

Verifying update compatibility and combining data:
NICID was not found from the list of supported platforms.
Incompatible updata data.

This is a Netgear MA311.
On Sunday, October 19, 2003, at 11:37  PM, Roland van Laar wrote:

> On Mon, 2003-10-20 at 00:55, Christopher Evans wrote:
>
>> INFO:
>> wlan0: NIC: id=0x8013 v1.0.0
>> wlan0: PRI: id=0x15 v1.0.7
>> wlan0: STA: id=0x1f v1.7.4
>
> There might be another reason for this.
> When using STA 1.7.4 the PRI needs to be: 1.1.1
>
> ragards,
>
> Roland
>
>
>
--
       -+--++---+++----++++-----+++++-----++++----+++---++--+-
      ___
  _.-|   |          |\__/,|   (`\      | Chris Evans
{   |   |          |o o  |__ _) )     |
  "-.|___|        _.( T   )  `  /      | cwevans at acm.org
   .--'-`-.     _((_ `^--' /_<  \      |
.+|______|__.-||__)`-'(((/  (((/      |  "Any technology distinguishable
                                       |  from magic, is not advanced
   Nika plays with a computer mouse    |  enough" -- Gregory Benford
       BY: Mike Rosulek                |
          http://showcase.netins.net/web/mikewrld/ascii/