may be another bug

[Tomas Charvat]

ok somebody already posted something about this problem but i didnt keep
that message

somebody reported problem that he lost some clients when his IP comes up on
interface

so i have this problem
i set up wlan3 before wlan3 IP comes up

iwpriv wlan3 reset 1
    iwpriv wlan3 reset 2
    iwconfig wlan3 mode master essid cobraac channel 5 retry 30 txpower 2
    iwpriv wlan3 maccmd 1
        iwpriv wlan3 addmac 00:06:25:1B:C2:6A # cobra
    iwpriv wlan3 addmac 00:02:72:02:47:68 # murin
    iwpriv wlan3 addmac 00:02:72:02:F5:DF # murin2
       iwpriv wlan3 wds_add 00:02:72:02:47:68 # murinAP
    iwpriv wlan3 wds_add 00:02:72:02:F5:DF # murinAP2


ok after wlan3 is up, wlan3wds0 is going up ... OK
wlan3wds0 is up and i can ping it
in a moment when wlan3wds1 comes up, i lost wlan3wds0 and i have to run set
up script again to get it back

but if i will up wlan3 and wlan3wds0 during boot time and wlan3wds1 i will
up manualy after boot
client on wlan3wds0 will not get lost

there is no any single command starting on IW in wlan3wds0(1) init script
i do not see any problems with bad broadcast or subnet mask

once i restart wlan3 , i can stop/start wds0(1) and client on wlan3wds0 will
everytime comeback

any tip ?

i have one more machine with 4 wds clients... but they do run w/o problem
its not may be bug in hostap ... may be some combination of sumfing ?
there is no any single msg in syslog

regards tomas


routing table

172.20.2.40     *               255.255.255.248 U     0      0        0
wlan3wds1
172.20.2.32     *               255.255.255.248 U     0      0        0
wlan3wds0
172.20.5.0      *               255.255.255.248 U     0      0        0
wlan2
172.20.4.8      *               255.255.255.248 U     0      0        0
wlan0
localnet        *               255.255.255.248 U     0      0        0 eth0
172.20.2.8      xcobra.rip      255.255.255.248 UG    0      0        0
wlan3
172.20.2.0      *               255.255.255.248 U     0      0        0
wlan3
172.20.5.16     *               255.255.255.240 U     0      0        0
wlan2
172.20.4.48     kryspingw.rip   255.255.255.240 UG    0      0        0
wlan0
172.20.4.32     *               255.255.255.240 U     0      0        0
wlan2
172.20.3.0      kryspingw.rip   255.255.255.0   UG    0      0        0
wlan0
172.20.13.0     kryspingw.rip   255.255.255.0   UG    0      0        0
wlan0
172.20.0.0      radiatorgw.rip  255.255.254.0   UG    0      0        0 eth0
loopback        localhost       255.0.0.0       UG    0      0        0 lo
default         brouter.el-cha. 0.0.0.0         UG    1      0        0
wlan1