wlan1: MAC port 0 enabling failed

[alf romeo]

Hi there...Im trying to have both cards(wpc11) run on
the same pc.Im using RH9 w/ kernel 2.4.22 and
hostap-0.0.4 driver. My problem is that only one of
the cards im using is working(wlan0)..the other(wlan1)
is not...wlan1 show no MAC address...here is a part
from dmesg...

hostap_cs: index 0x01: Vcc 5.0, irq 11, io
0x0140-0x017f
divert: allocating divert_blk for wlan1
hostap_cs: Registered netdevice wlan1
prism2_hw_init()
divide error: 0000
CPU:    0
EIP:    0010:[<c889b608>]    Not tainted
EFLAGS: 00000246
eax: 00000000   ebx: 0000d1a4   ecx: 00000140   edx:
00000170
esi: c787f600   edi: 0000cfb0   ebp: c7043b68   esp:
c7043778
ds: 0018   es: 0018   ss: 0018
Process cardmgr (pid: 561, stackpage=c7043000)
Stack: c787f600 00000001 c7070000 c889b8fa c787f600
00000001 c704394c c70961a0
       c70961a0 c787f606 c70704ba c88a07c7 c787f600
00000001 0000017f c704394c
       00000000 00000000 00000000 00000000 00000000
00000000 c7070000 c787f600
Call Trace:    [<c889b8fa>] [<c88a07c7>] [<c03c5cab>]
[<c03c5fcb>] [<c88a512a>]
  [<c03c7366>] [<c03c5cab>] [<c03c748e>] [<c0213ae5>]
[<c03c5e4a>] [<c03c72eb>]
  [<c03c73a8>] [<c03c5cab>] [<c03c5fcb>] [<c88a512a>]
[<c03c7366>] [<c03c5cab>]
  [<c03c748e>] [<c0213ae5>] [<c0213e2a>] [<c88a0ace>]
[<c88a5120>] [<c03cbf10>]
  [<c88a5120>] [<c888f09c>] [<c021c5f6>] [<c889f256>]
[<c0213ae5>] [<c0213e2a>]
  [<c03cd245>] [<c88a0121>] [<c88a5120>] [<c88a09f8>]
[<c03c9758>] [<c03c9788>]
  [<c03ca2b9>] [<c020fce1>] [<c021cd88>] [<c0438983>]
[<c0489cbf>] [<c048a6df>]
  [<c043531f>] [<c02defd0>] [<c043631a>] [<c02dffc3>]
[<c02df525>] [<c02dfa07>]
  [<c020fce1>] [<c021cd4a>] [<c0248023>] [<c0201113>]

Code: 83 e0 10 66 85 c0 0f 85 79 ff ff ff a1 64 7d 16
c0 39 d8 78
 <7>wlan1: hfa384x_cmd: entry still in list?
(entry=c6ba8120, type=0, res=0)
wlan1: hfa384x_cmd: command was not completed (res=0,
entry=c6ba8120, type=0, cmd=0x0021, param0=0xfdc6,
EVSTAT=0000 INTEN=fdc6)
wlan1: hfa384x_get_rid: CMDCODE_ACCESS failed
(res=-110, rid=fdc6, len=12)
wlan1: hfa384x_cmd: entry still in list?
(entry=c6ba8220, type=0, res=0)
wlan1: hfa384x_cmd: command was not completed (res=0,
entry=c6ba8220, type=0, cmd=0x0021, param0=0xfdc6,
EVSTAT=0000 INTEN=ffff)
wlan1: prism2_open
wlan1: hfa384x_cmd_issue: cmd reg was busy for 5000
usec
wlan1: hfa384x_cmd_issue - timeout - reg=0x8021
wlan1: hfa384x_cmd: entry still in list?
(entry=c11dcfa0, type=0, res=-1)
wlan1: hfa384x_cmd: interrupted; err=-110
wlan1: MAC port 0 enabling failed
wlan1: could not enable MAC port
wlan1: prism2_close

Then what i did was try both cards on a different
PC.It works on the other w/c is running slackware9 w/
kernel 2.4.22 and hostap-0.0.4. Is the problem cause
by the OS or the hostap driver?!...Hope you could help
on this...I appreciate any help you could give.thanks
for your time..

__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/