XI-325H and Acer TravelMate 242

[Jouni Malinen]

On Thu, Nov 20, 2003 at 07:03:43PM +0100, Michal Semler (volny.cz) wrote:

> I have bought ZCOM XI-325H Prism2 based card into PCMCIA slot.
> 
> After plugging into slot leds starts shining, but card is not shown in lspci.
> Under WinXP card works normally!!
> 
> My ethernet card into PCMCIA slot works perfectly and is shown in lspci

In that case your Ethernet card is Cardbus, not PC Card/PCMCIA like
Prism2. PC Cards do not show up in lspci output; you need to use
pcmcia-cs (cardmgr) to control them. Assuming you have this configured,
'cardmgr ident' should show the PC Cards.

-- 
Jouni Malinen                                            PGP id EFC895FA