MAC port 0 enabling failed

[Jouni Malinen]

On Tue, Oct 28, 2003 at 02:09:25PM +0100, Thomas Schreiner wrote:

> I encountered a strange problem while setting up my Senao SL-2011CD PCMCIA card (Prism 2.5) with hostap-0.0.4.

Could you please first try whether you get the same errors when using the
latest driver release (0.1.1 or current CVS snapshot)? 

> hostap_cs: index 0x01: Vcc 3.3, irq 3, io 0x0180-0x01bf

> wlan0: hfa384x_cmd: entry still in list? (entry=c6be58b0, type=0, res=0)
> wlan0: hfa384x_cmd: command was not completed (res=0, entry=c6be58b0, type=0, cmd=0x0021, param0=0xfd0b, EVSTAT=8010 INTEN=0010)
> wlan0: interrupt delivery does not seem to work

This is usually caused by incorrect pcmcia-cs configuration, but if I
understood correctly, you can use the same card in the same host with
orinoco_cs driver. Do you get the same irq and io ports assigned in that
case? Do you see irq 3 counter increasing in /proc/interrupts when Host
AP driver is initializing the card?

-- 
Jouni Malinen                                            PGP id EFC895FA