hostap 0.0.3 / 2.5.70 GetNextTuple issue

[Andreas Jellinghaus]

Hi,

pcmcia stop -> pcmcia start -> insert card -> does not work.
pcmcia stop -> insert card -> pcmcia start -> works fine.

tried it several times, reproducable.

compaq wl100 card, worked very fine with 2.5.69  and hostap 0.0.2
(except for not handling the interrupt sometimes).

related kernel config:
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_KMOD=y
CONFIG_ISA=y
CONFIG_HOTPLUG=y
CONFIG_PCMCIA=y
CONFIG_CARDBUS=y
CONFIG_I82092=y
CONFIG_I82365=y
CONFIG_TCIC=y
CONFIG_PCMCIA_PROBE=y
CONFIG_NET_RADIO=y
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
CONFIG_NET_WIRELESS=y
CONFIG_NET_PCMCIA=y

syslog messages:
cardmgr[306]: watching 2 sockets
kernel: cs: IO port probe 0x0c00-0x0cff: clean.
kernel: cs: IO port probe 0x0800-0x08ff: excluding 0x800-0x84f
kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x280-0x287
0x3c0-0x3df 0x4d0-0x4d7
kernel: cs: IO port probe 0x0a00-0x0aff: clean.
cardmgr[307]: starting, version is 3.2.2
cardmgr[307]: socket 0: Compaq WL100 11Mb/s WLAN Card
kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean.
cardmgr[307]: executing: 'modprobe hostap_crypt'
kernel: hostap_crypt: registered algorithm 'NULL'
cardmgr[307]: executing: 'modprobe hostap'
cardmgr[307]: executing: 'modprobe hostap_cs'
kernel: hostap_cs: 0.0.3 - 2003-05-18 (Jouni Malinen
<jkmaline at cc.hut.fi>)
kernel: hostap_cs: setting Vcc=33 (constant)
kernel: hostap_cs: CS_EVENT_CARD_INSERTION
kernel: prism2_config()
kernel: hostap_cs: setting Vcc=33 (from config)
kernel: hostap_cs: GetNextTuple: No more items
kernel: prism2_release
kernel: : card already removed or not configured during shutdown
kernel: release - done
kernel: hostap_cs: CS_EVENT_CARD_INSERTION
kernel: prism2_config()
kernel: hostap_cs: setting Vcc=33 (from config)
kernel: hostap_cs: GetNextTuple: No more items
kernel: prism2_release
kernel: : card already removed or not configured during shutdown
kernel: release - done
cardmgr[307]: get dev info on socket 0 failed: Resource temporarily
unavailable
kernel: prism2_detach
kernel: hostap_free_data: ap has not yet been initialized - skip
resource freeing
cardmgr[307]: executing: 'modprobe -r hostap_cs'
cardmgr[307]: executing: 'modprobe -r hostap'
kernel: hostap_cs: Driver unloaded
kernel: hostap_crypt: unregistered algorithm 'NULL' (deinit)


cardmgr[558]: watching 2 sockets
kernel: cs: IO port probe 0x0c00-0x0cff: clean.
kernel: cs: IO port probe 0x0800-0x08ff: excluding 0x800-0x84f
kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x280-0x287
0x3c0-0x3df 0x4d0-0x4d7
kernel: cs: IO port probe 0x0a00-0x0aff: clean.
cardmgr[559]: starting, version is 3.2.2
cardmgr[559]: socket 0: Compaq WL100 11Mb/s WLAN Card
cardmgr[559]: executing: 'modprobe hostap_crypt'
kernel: hostap_crypt: registered algorithm 'NULL'
cardmgr[559]: executing: 'modprobe hostap'
cardmgr[559]: executing: 'modprobe hostap_cs'
kernel: hostap_cs: 0.0.3 - 2003-05-18 (Jouni Malinen
<jkmaline at cc.hut.fi>)
kernel: hostap_cs: setting Vcc=33 (constant)
kernel: hostap_cs: CS_EVENT_CARD_INSERTION
kernel: prism2_config()
kernel: hostap_cs: setting Vcc=33 (from config)
kernel: Checking CFTABLE_ENTRY 0x01 (default 0x01)
kernel: IO window settings: cfg->io.nwin=1 dflt.io.nwin=1
kernel: io->flags = 0x0046, io.base=0x0000, len=64
kernel: hostap_cs: index 0x01: Vcc 3.3, irq 3, io 0x0100-0x013f
kernel: hostap_cs: Registered netdevice wlan0
kernel: prism2_hw_init()
kernel: prism2_hw_init: initialized in 10801 iterations
kernel: wlan0: trying to read PDA from 0x007f0000: failed
kernel: wlan0: trying to read PDA from 0x003f0000: failed
kernel: wlan0: trying to read PDA from 0x00390000: OK
kernel: wlan0: NIC: id=0x8002 v1.0.1
kernel: wlan0: PRI: id=0x15 v0.3.0
kernel: wlan0: STA: id=0x1f v1.4.9
kernel: wlan0: defaulting to bogus WDS frame as a workaround for
firmware bug in Host AP mode WDS
cardmgr[559]: executing: './network start wlan0'
kernel: prism2: wlan0: operating mode changed 3 -> 1
kernel: wlan0: LinkStatus=2 (Disconnected)
kernel: wlan0: LinkStatus: BSSID=44:44:44:44:44:44
kernel: wlan0: LinkStatus=2 (Disconnected)
kernel: wlan0: LinkStatus: BSSID=44:44:44:44:44:44

Regards, Andreas