CardServices release does not match

[Slobodan Tomic]

  I belive in latest version from CSV (or at least from 19-05-2003)
there is a problem in Makefile. It doesn't pass PCMCIA_PATH variable to
driver/module/Makefile, so you end up using kernel pcmcia and that is
where version mismatch comes from.

  Regards,
  st.

On Sat, 2003-05-24 at 05:58, Thomas Schreiner wrote:
> Hi all,
> there's always one more obstacle on the way to a working AP, even if you 
> think you're done. Right now, and after a lot of help from some of you 
> (thanks a lot!) my situation is as follows:
> -I got the right pcmcia-modules loaded
> -The card is recognized by cardctl ident (at last...)
> -hostap-modules are loaded partially (and that's where the problem is)
> 
> When the pcmcia services are started, the system issues a high and a low 
> beep (ok, better than no beeps at all like before), and the logs show 
> hostap_cs-related error messages. But see the attached output yourself, 
> hopefully you can help me with this one too.
> 
> Thanks a whole lot,
> 
> Thomas
> 
> # cardctl ident
> Socket 0:
>    product info: "INTERSIL", "HFA384x/IEEE", "Version 01.02", ""
>    manfid: 0x0156, 0x0002
>    function: 6 (network)
> 
> # dmesg (right after /etc/init.d/pcmcia restart)
> [...]
> hostap_crypt: unregistered algorithm 'NULL' (deinit)
> unloading PCMCIA Card Services
> Linux PCMCIA Card Services 3.2.5
>    kernel build: 2.4.21-rc2 #5 SMP Fri May 23 02:02:40 CEST 2003
>    options:  [pci] [cardbus] [apm]
> Intel ISA/PCI/CardBus PCIC probe:
> PCI: Found IRQ 11 for device 00:10.0
> PCI: Sharing IRQ 11 with 00:08.0
>    Ricoh RL5C475 rev 80 PCI-to-CardBus at slot 00:10, mem 0x10000000
>      host opts [0]: [isa irq] [io 3/6/1] [mem 3/6/1] [pci irq 11] [lat 
> 72/176] [bus 2/5]
>      ISA irqs (default) = 3,4,5,7,10,12 PCI status changes
> cs: memory probe 0xa0000000-0xa0ffffff: clean.
> hostap_crypt: registered algorithm 'NULL'
> hostap_cs: 0.0.3 - 2003-05-18 (Jouni Malinen <jkmaline at cc.hut.fi>)
> hostap_cs: CardServices release does not match!
> hostap_cs: 0.0.3 - 2003-05-18 (Jouni Malinen <jkmaline at cc.hut.fi>)
> hostap_cs: CardServices release does not match!
> 
> # cat /var/log/daemon.log (right after /etc/init.d/pcmcia restart)
> [...]
> May 24 04:48:33 airbase cardmgr[2666]: watching 1 sockets
> May 24 04:48:33 airbase cardmgr[2667]: starting, version is 3.2.5
> May 24 04:48:33 airbase cardmgr[2667]: socket 0: Senao 2511-CD Plus
> May 24 04:48:33 airbase cardmgr[2667]: executing: 'modprobe hostap_crypt'
> May 24 04:48:34 airbase cardmgr[2667]: executing: 'modprobe hostap'
> May 24 04:48:34 airbase cardmgr[2667]: executing: 'modprobe hostap_cs'
> May 24 04:48:34 airbase cardmgr[2667]: + 
> /lib/modules/2.4.21-rc2/pcmcia/hostap_cs.o: init_module: Operation not 
> permitted
> May 24 04:48:34 airbase cardmgr[2667]: + 
> /lib/modules/2.4.21-rc2/pcmcia/hostap_cs.o: insmod 
> /lib/modules/2.4.21-rc2/pcmcia/hostap_cs.o failed
> May 24 04:48:34 airbase cardmgr[2667]: + 
> /lib/modules/2.4.21-rc2/pcmcia/hostap_cs.o: insmod hostap_cs failed
> May 24 04:48:34 airbase cardmgr[2667]: + Hint: insmod errors can be 
> caused by incorrect module parameters, including invalid IO or IRQ 
> parameters
> May 24 04:48:34 airbase cardmgr[2667]: modprobe exited with status 255
> May 24 04:48:34 airbase cardmgr[2667]: executing: 'insmod 
> /lib/modules/2.4.21-rc2/pcmcia/hostap_cs.o'
> May 24 04:48:34 airbase cardmgr[2667]: + 
> /lib/modules/2.4.21-rc2/pcmcia/hostap_cs.o: init_module: Operation not 
> permitted
> May 24 04:48:34 airbase cardmgr[2667]: + Hint: insmod errors can be 
> caused by incorrect module parameters, including invalid IO or IRQ 
> parameters
> May 24 04:48:34 airbase cardmgr[2667]: insmod exited with status 1
> May 24 04:48:35 airbase cardmgr[2667]: get dev info on socket 0 failed: 
> Resource temporarily unavailable
> 
> # iwconfig
> lo        no wireless extensions.
> 
> eth0      no wireless extensions.
> 
> _______________________________________________
> HostAP mailing list
> HostAP at shmoo.com
> http://lists.shmoo.com/mailman/listinfo/hostap