Success story 1-3

[Raffaele Raf]

Success story 5

The last broken card had everything broken: CIS, PDA,
primary and secondary firmware. Luckily I had a
firmware dump of that card made with Winupdate
(imagedump.hex), so what I did was:

A) flash -legacy -3v -on -i i10003c0.hex 
B) flash -legacy -g -pf -p 8002.pda -spi -hf -3v -on
-d imagedump.hex 

It fixed the CIS, so after this I could run the
procedure in 4 steps above.

If the procedures do not work, perhaps your card works
at 5 volts,
so try to change -3v with -5v.
Try more than once. If the hardware is still good, you
should succeed.

I hope the information above will help someone.


---------------------------------------------------------------------
Interesting links:

http://www.rflinx.com/ - Site where you can find very
cheap 2.4GHZ amplifiers

http://www.ralphfowler.com/dwl900.html Good info about
dlink 
dwl-900ap+

http://www.teletronics.com/tii/products/wireless_lan.html
- Good
shop for Prism based devices

http://www.pcengines.ch/cflash.htm - Good shop for
compact flash to 
ide adapters allowing bootstrap!!!

http://www.synchrotech.com/products/card-rw_06.html -
Good shop for
pci cards with embedded pcmcia carrier.

http://www.lillicomputers.net/dept.asp?dept_id=08 -
Good shop for
ITX form factor motherboards


http://www.pccard.co.uk/copy/aboutmce.php - Good
software to program 
SRAM-FLASH cards under Windows

--------------------------------------------------------------------




______________________________________________________________________
Yahoo! Mail: 6MB di spazio gratuito, 30MB per i tuoi allegati, l'antivirus, il filtro Anti-spam
http://it.yahoo.com/mail_it/foot/?http://it.mail.yahoo.com/