iwconfig error

[Gilad Suberri]

I had a lot of trouble installing hostAP, but finally got my wireless card 
recognized and using lsmod see that the hostAP modules are loaded. Now when 
I run iwconfig, I get this message:

Driver for device wlan0 has been compiled with version 14 of Wireless 
Extension, while this program is using version 12. Some things may be 
broken...

Even more so the problem is when I try to set things such as essid or mode i 
get this error:

Error for wireless request "Set ESSID" : SET failed on device wlan0, Invalid 
argument.

Are the two problems inter-related? Any ideas of fixes? I know most of you 
might want to kill me for this, but since I wasnt sure which version of 
hostAP to install I decided to [try] to install all of them (install pci, 
pccard, plx)..could this add to the problem? Thanks in advance.

Also, if this helps, this is output from dmesg:

wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fc09, len=2)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 1000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0x8000
wlan0: hfa384x_cmd: entry still in list? (entry=d66b4d80, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_cmd_issue: cmd reg was busy for 1000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0x8000
wlan0: hfa384x_cmd: entry still in list? (entry=d66b4d80, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fd48, len=2)
wlan0: hfa384x_cmd_issue: cmd reg was busy for 1000 usec
wlan0: hfa384x_cmd_issue - timeout - reg=0x8000
wlan0: hfa384x_cmd: entry still in list? (entry=df812700, type=0, res=-1)
wlan0: hfa384x_cmd: interrupted; err=-110
wlan0: hfa384x_set_rid: CMDCODE_ACCESS_WRITE failed (res=-110, rid=fc02, 
len=34)



Gilad







_________________________________________________________________
Tired of spam? Get advanced junk mail protection with MSN 8. 
http://join.msn.com/?page=features/junkmail