Hostap and ZOOMAir 4105 with PCI-PCMCIA bridge doesnt work unde SLACK 8.1?

[jacek]

Welcome,


I have ZOOMAIR 4105 PCI_PCMCIA card.
There is inside 0.3.0  Primary and 0.8.3 Station Firmware.
I am using it in VIA Epia Motherboard with oryginal PCI-PCMCIA bridge.
Linux Slackware 8.1 with Kernel 2.5.63 and Hostap from the curent CVS image.

And there are problems with hostap.

When I am puting my card into PC syslog writes:

Mar  3 11:35:10 epia3 cardmgr[46]: socket 0: ZoomAir 4100 11Mb/s WLAN Card
Mar  3 11:35:10 epia3 cardmgr[46]: executing: 'modprobe hostap_crypt'
Mar  3 11:35:10 epia3 cardmgr[46]: + modprobe: QM_MODULES: Function not 
implemented
Mar  3 11:35:10 epia3 cardmgr[46]: +
Mar  3 11:35:10 epia3 cardmgr[46]: + insmod: QM_MODULES: Function not 
implemented
Mar  3 11:35:10 epia3 cardmgr[46]: +
Mar  3 11:35:10 epia3 cardmgr[46]: + insmod: insmod 
/lib/modules/2.5.63/net/hostap_crypt.o failed
Mar  3 11:35:10 epia3 cardmgr[46]: + insmod: QM_MODULES: Function not 
implemented
Mar  3 11:35:10 epia3 cardmgr[46]: +
Mar  3 11:35:10 epia3 cardmgr[46]: + insmod: QM_MODULES: Function not 
implemented
Mar  3 11:35:10 epia3 cardmgr[46]: +
Mar  3 11:35:10 epia3 cardmgr[46]: + insmod: insmod hostap_crypt failed
Mar  3 11:35:10 epia3 cardmgr[46]: modprobe exited with status 255
Mar  3 11:35:10 epia3 cardmgr[46]: module 
/lib/modules/2.5.63/pcmcia/hostap_crypt.o not available
Mar  3 11:35:10 epia3 cardmgr[46]: executing: 'modprobe hostap'
Mar  3 11:35:10 epia3 cardmgr[46]: + modprobe: QM_MODULES: Function not 
implemented
Mar  3 11:35:10 epia3 cardmgr[46]: +
Mar  3 11:35:10 epia3 cardmgr[46]: + insmod: QM_MODULES: Function not 
implemented
Mar  3 11:35:10 epia3 cardmgr[46]: +
Mar  3 11:35:10 epia3 cardmgr[46]: + insmod: insmod 
/lib/modules/2.5.63/net/hostap.o failed
Mar  3 11:35:10 epia3 cardmgr[46]: + insmod: QM_MODULES: Function not 
implemented
Mar  3 11:35:10 epia3 cardmgr[46]: +
Mar  3 11:35:10 epia3 cardmgr[46]: + insmod: QM_MODULES: Function not 
implemented
Mar  3 11:35:10 epia3 cardmgr[46]: +
Mar  3 11:35:10 epia3 cardmgr[46]: + insmod: insmod hostap failed
Mar  3 11:35:10 epia3 cardmgr[46]: modprobe exited with status 255
Mar  3 11:35:10 epia3 cardmgr[46]: module 
/lib/modules/2.5.63/pcmcia/hostap.o not available
Mar  3 11:35:10 epia3 cardmgr[46]: executing: 'modprobe hostap_cs'
Mar  3 11:35:10 epia3 cardmgr[46]: + modprobe: QM_MODULES: Function not 
implemented
Mar  3 11:35:10 epia3 cardmgr[46]: +
Mar  3 11:35:10 epia3 cardmgr[46]: + insmod: QM_MODULES: Function not 
implemented
Mar  3 11:35:10 epia3 cardmgr[46]: +
Mar  3 11:35:10 epia3 cardmgr[46]: + insmod: insmod 
/lib/modules/2.5.63/pcmcia/hostap_cs.o failed
Mar  3 11:35:10 epia3 cardmgr[46]: + insmod: QM_MODULES: Function not 
implemented
Mar  3 11:35:10 epia3 cardmgr[46]: +
Mar  3 11:35:10 epia3 cardmgr[46]: + insmod: QM_MODULES: Function not 
implemented
Mar  3 11:35:10 epia3 cardmgr[46]: +
Mar  3 11:35:10 epia3 cardmgr[46]: + insmod: insmod hostap_cs failed
Mar  3 11:35:10 epia3 cardmgr[46]: modprobe exited with status 255
Mar  3 11:35:10 epia3 cardmgr[46]: executing: 'insmod 
/lib/modules/2.5.63/pcmcia/hostap_cs.o'
Mar  3 11:35:10 epia3 cardmgr[46]: + insmod: QM_MODULES: Function not 
implemented
Mar  3 11:35:10 epia3 cardmgr[46]: +
Mar  3 11:35:10 epia3 cardmgr[46]: insmod exited with status 1
Mar  3 11:35:11 epia3 cardmgr[46]: get dev info on socket 0 failed: 
Resource temporarily unavailable
Mar  3 11:35:11 epia3 cardmgr[46]: wrong module 'hostap_cs' for device 
'hostap_cs'?

My Hostap was made by commands:
make pccard
make install_pccard.

command depmod -ae gives me:

depmod: QM_MODULES: Function not implemented



Do you have any sugestions?

Jacek