Ricoh RL5c475

[Guido Augustowski]

Almavido: I?m having problems mailing directly to you, do you have another
mail address?

Sorry for the offtopic.

Guido

----- Original Message ----- 
From: "Guido Augustowski" <gha at fibertel.com.ar>
To: "amalvido" <amalvido#miranda at pasarela.tsc.uvigo.es>
Cc: <hostap at shmoo.com>
Sent: Monday, June 23, 2003 12:38 PM
Subject: Re: Ricoh RL5c475


Hi!
I?ll tell you what I did:
I?m using kernel 2.4.20 with the attached configuration.
After booting with this kernel, I compiled PCMCIA-CS 3.2.4
With that kernel and that PCMCIA-CS, I have no problems with the adaptor.
The wireless PCMCIA has nothing to do with this, Ican take it out, and the
Ricoh adaptor will still have no problems.

This is the output of cat /proc/interrupts:

  0:   58759234          XT-PIC  timer
  1:         60          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  9:    5427251          XT-PIC  Ricoh Co Ltd RL5c475, hostap_cs
 10:    1188478          XT-PIC  eth0
 11:     671737          XT-PIC  eth1
 14:     273204          XT-PIC  ide0
NMI:          0
ERR:          0


In /etc/init.d/pcmcia I?m using "PCIC=i82365" and "PCIC_OPTS=".
With this configurations, it is working perfect.
If this doesn?t help you, tell me again and I?ll se what else can I do.

Sorry for my bad English.

Guido

----- Original Message ----- 
From: "amalvido" <amalvido#miranda at gate.tsc.uvigo.es>
To: <gha at fibertel.com.ar>
Sent: Monday, June 23, 2003 11:22 AM
Subject: Ricoh RL5c475


> Best regards,
>
> Thanks for your response.
> I have a problem because my PCMCIA-PCI adapater don't get one IRQ, and I
don't
> know how fix this. The lspci output is same than your:
>
> CardBus bridge: Ricoh Co Ltd RL5c475 (rev 80)
>
> When did you buy your Adapter?.
> Does this adapter get IRQ without the card inserted in?.
> Could you sendme the dmesg output?
> How do you compile kernel and driver?
> How you install hostap or hostap_pci or hostap_plx driver?
>
> I will be gratefull of you can help me.
>
> Thank you very much.
>
>