2002.10.12 => 0.0.[1-3] problem

Huber, Rainer rainer.huber
Mon Jun 9 03:09:55 PDT 2003


Hi List,

i've just tried to upgrade my hostap from 2002.10.12 (Debian package) to
0.0.3 (hostap release).  Everything worked well for month until I loaded the
new hostap_pci.o module. The WLAN NIC is a Netgear MA311 - the Mainboard is
a MSI K7T Turbo (VIA KT133A)

After 'modprobe hostap_pci' the whole system freezes. I get the following
output on the console, which looks good for me until the freeze:

hostap_pci: 0.0.3 - 2003-05-18 ......
PCI: Found IRQ 15 for device 00:0c.0
hostap_pci: Registered netdevice wlan0
---> freeze

=> I rebooted and loaded the 2002.10.12 modules again => everything works
well

Jun  9 11:41:17 passport kernel: hostap_pci: hostap_pci.c 0.0.0 2002-10-12
(SSH Communications Security Corp, Jouni Malinen)
Jun  9 11:41:17 passport kernel: hostap_pci: (c) Jouni Malinen
<jkmaline at cc.hut.fi>
Jun  9 11:41:17 passport kernel: PCI: Found IRQ 15 for device 00:0c.0
Jun  9 11:41:17 passport kernel: PCI: Sharing IRQ 15 with 00:08.0
Jun  9 11:41:17 passport kernel: hostap_pci: Registered netdevice wlan0
Jun  9 11:41:17 passport kernel: hostap_pci: Registered netdevice wlan0ap
for AP management
Jun  9 11:41:17 passport kernel: prism2_hw_init()
Jun  9 11:41:17 passport kernel: prism2_hw_config: initialized in 20228
iterations
Jun  9 11:41:17 passport kernel: wlan0: trying to read PDA from 0x007f0000:
OK
Jun  9 11:41:17 passport kernel: wlan0: NIC: id=0x8013 v1.0.0
Jun  9 11:41:17 passport kernel: wlan0: PRI: id=0x15 v1.1.0
Jun  9 11:41:17 passport kernel: wlan0: STA: id=0x1f v1.4.9
Jun  9 11:41:17 passport kernel: wlan0: LinkStatus=2 (Disconnected)
Jun  9 11:41:17 passport kernel: wlan0: Intersil Prism2.5 PCI:
mem=0xd8002000, irq=15

I've played around with 0.0.1, but I am facing the same problem.

=> I thought to try in on a different host (ABIT BH6 / Intel BX chipset) =>
same Problem, system freezes
=> another host (ASUS A7V8X / VIA KT400) => hostap 0.0.3 works well

Jun 11 11:51:32 titan kernel: hostap_pci: 0.0.3 - 2003-05-18 (Jouni Malinen
<jkmaline at cc.hut.fi>)
Jun 11 11:51:32 titan kernel: PCI: Enabling device 00:0d.0 (0014 -> 0016)
Jun 11 11:51:32 titan kernel: PCI: Found IRQ 11 for device 00:0d.0
Jun 11 11:51:32 titan kernel: PCI: Sharing IRQ 11 with 01:00.0
Jun 11 11:51:33 titan kernel: hostap_pci: Registered netdevice wlan0
Jun 11 11:51:33 titan kernel: prism2_hw_init()
Jun 11 11:51:33 titan kernel: prism2_hw_init: initialized in 20257
iterations
Jun 11 11:51:33 titan kernel: wlan0: NIC: id=0x8013 v1.0.0
Jun 11 11:51:33 titan kernel: wlan0: PRI: id=0x15 v1.1.0
Jun 11 11:51:33 titan kernel: wlan0: STA: id=0x1f v1.4.9
Jun 11 11:51:33 titan kernel: wlan0: defaulting to bogus WDS frame as a
workaround for firmware bug in Host AP mode WDS
Jun 11 11:51:33 titan kernel: wlan0: Intersil Prism2.5 PCI: mem=0xdf000000,
irq=11


I've also tried the latest CVS snapshot without luck...

Has anybody else of you had such problems? (2002.10.12 works and 0.0.? not)
Can I do anything to provide more detailed logs?
Any ideas?

regards,
Rainer




More information about the Hostap mailing list