ap_bridge_packets between two interfaces

[Jun Sun]

On Wed, Jul 30, 2003 at 10:05:35PM -0400, Doug Yeager wrote:
> use the netfilter bridge patch to block traffic between the bridge ports.
>
<snip>

I am not even sure in his case whether packets are "bridged" or routed.

Pablo, are wlan0 and wlan1 on the same subnets or on different subnets?

If they are on different subnets, iptables should be sufficient to block
the traffic between them.

If they are on the same subnet (as in "bridging" mode), then hostap driver 
might be the suspect.  Or the above patch might work.

Jun