complete list of hostap files, pse

[Francois BERGERET]

Hi the list,
Hi all of you who have replied to my request.

My mistake was to use an incorrect version of Bering V1.1 with a Jacques Nilo's package compiled for the Bering V1.2, sorry !
I have checked again with the V1.2 this package and all seems ok now.
I have seen the SSID "test" on the air, proving that the hostap is running correctly.
I have only few difficulties to lurn how to do to modify the wireless parameters as SSID, channel, etc... because I don't see in
what file this params are.

If any of you knows, please...

TIA

Best Regards,
Francois BERGERET,
France,
F6HQZ (HAM radio callsign).


> -----Message d'origine-----
> De : Dominique Blas [mailto:ml at blas.net]
> Envoy? : lundi 7 juillet 2003 03:25
> ? : f6hqz at easyconnect.fr; hostap at shmoo.com
> Objet : Re: complete list of hostap files, pse
>
>
> Le Dimanche 6 Juillet 2003 21:03, Francois BERGERET a ?crit :
> > Hi Jonnas, hi the list,
> >
> > Thanks for the pointer.
> >
> > Sorry for my very poor english.
> > I tempt to explain differently :
> > I have Bering 1.1 running. Jacques Nilo, which is the project manager of
> > this fantastic distro, has compiled hostap for it. But, after having
> > installed the pcmcia_hostap.lrp package, it seems that some files are
> > missing or I have not completely understood how to do with it.
> > What I am asking is the list of the files used by hostap and their exact
> > path in a Debian Woody directory tree.
> >
>
> Fran?ois,
>
> as always with hostap the make is fairly simple :
> 	make
> This make will also compile the companion modules : hostap, hostap_crypt.o and hostap_crypt_wep.o
>
> Then you move the .o in their appropriate directory (/lib/modules/<kernel name>/pcmcia for hostap_cs.o and
> /lib/modules/<kernel name>/net for the others).
>
> Or, SIMPLER,
> 	make install
> 	will move automatically the .o in the correct destination directory and will do the depmod -a for you
>
> If you have unresolved symbols when you load hostap_pci (or hostap_cs or hostap_plx) it means that your development
> kernel version and your running kernel version don't match !
> Be sure that your modules where compiled with the same version (label above all) of kernel you're are running under.
> Be also sure that the kernel you are running had Hermes Chipset support checked.
>
>
> Here is the whole list of files for hostap 0.0.3.
>
> 	hostap-0.0.3/COPYING
> 	hostap-0.0.3/ChangeLog
> 	hostap-0.0.3/FAQ
> 	hostap-0.0.3/Makefile
> 	hostap-0.0.3/README
> 	hostap-0.0.3/driver_source.txt
> 	hostap-0.0.3/driver/
> 	hostap-0.0.3/driver/etc/
> 	hostap-0.0.3/driver/etc/hostap_cs.conf
> 	hostap-0.0.3/driver/hostap.mk
> 	hostap-0.0.3/driver/modules/
> 	hostap-0.0.3/driver/modules/.cvsignore
> 	hostap-0.0.3/driver/modules/Makefile
> 	hostap-0.0.3/driver/modules/hostap.c
> 	hostap-0.0.3/driver/modules/hostap.h
> 	hostap-0.0.3/driver/modules/hostap_ap.c
> 	hostap-0.0.3/driver/modules/hostap_ap.h
> 	hostap-0.0.3/driver/modules/hostap_compat.h
> 	hostap-0.0.3/driver/modules/hostap_config.h
> 	hostap-0.0.3/driver/modules/hostap_crypt.c
> 	hostap-0.0.3/driver/modules/hostap_crypt.h
> 	hostap-0.0.3/driver/modules/hostap_crypt_wep.c
> 	hostap-0.0.3/driver/modules/hostap_cs.c
> 	hostap-0.0.3/driver/modules/hostap_download.c
> 	hostap-0.0.3/driver/modules/hostap_hw.c
> 	hostap-0.0.3/driver/modules/hostap_info.c
> 	hostap-0.0.3/driver/modules/hostap_ioctl.c
> 	hostap-0.0.3/driver/modules/hostap_pci.c
> 	hostap-0.0.3/driver/modules/hostap_plx.c
> 	hostap-0.0.3/driver/modules/hostap_proc.c
> 	hostap-0.0.3/driver/modules/hostap_wlan.h
> 	hostap-0.0.3/hostapd/
> 	hostap-0.0.3/hostapd/.cvsignore
> 	hostap-0.0.3/hostapd/Makefile
> 	hostap-0.0.3/hostapd/accounting.c
> 	hostap-0.0.3/hostapd/accounting.h
> 	hostap-0.0.3/hostapd/ap.h
> 	hostap-0.0.3/hostapd/common.c
> 	hostap-0.0.3/hostapd/common.h
> 	hostap-0.0.3/hostapd/config.c
> 	hostap-0.0.3/hostapd/config.h
> 	hostap-0.0.3/hostapd/developer.txt
> 	hostap-0.0.3/hostapd/driver.c
> 	hostap-0.0.3/hostapd/driver.h
> 	hostap-0.0.3/hostapd/eapol_sm.c
> 	hostap-0.0.3/hostapd/eapol_sm.h
> 	hostap-0.0.3/hostapd/eloop.c
> 	hostap-0.0.3/hostapd/eloop.h
> 	hostap-0.0.3/hostapd/hostapd.accept
> 	hostap-0.0.3/hostapd/hostapd.c
> 	hostap-0.0.3/hostapd/hostapd.conf
> 	hostap-0.0.3/hostapd/hostapd.deny
> 	hostap-0.0.3/hostapd/hostapd.h
> 	hostap-0.0.3/hostapd/iapp.c
> 	hostap-0.0.3/hostapd/iapp.h
> 	hostap-0.0.3/hostapd/ieee802_11.c
> 	hostap-0.0.3/hostapd/ieee802_11.h
> 	hostap-0.0.3/hostapd/ieee802_11_auth.c
> 	hostap-0.0.3/hostapd/ieee802_11_auth.h
> 	hostap-0.0.3/hostapd/ieee802_1x.c
> 	hostap-0.0.3/hostapd/ieee802_1x.h
> 	hostap-0.0.3/hostapd/md5.c
> 	hostap-0.0.3/hostapd/md5.h
> 	hostap-0.0.3/hostapd/radius.c
> 	hostap-0.0.3/hostapd/radius.h
> 	hostap-0.0.3/hostapd/radius_client.c
> 	hostap-0.0.3/hostapd/radius_client.h
> 	hostap-0.0.3/hostapd/rc4.c
> 	hostap-0.0.3/hostapd/rc4.h
> 	hostap-0.0.3/hostapd/receive.c
> 	hostap-0.0.3/hostapd/sta_info.c
> 	hostap-0.0.3/hostapd/sta_info.h
> 	hostap-0.0.3/kernel-patches/
> 	hostap-0.0.3/kernel-patches/README
> 	hostap-0.0.3/kernel-patches/hostap-linux-2.4.20.patch
> 	hostap-0.0.3/kernel-patches/hostap-linux-2.5.60.patch
> 	hostap-0.0.3/kernel-patches/hostap-linux-2.5.69.patch
> 	hostap-0.0.3/pcmcia-cs-patches/
> 	hostap-0.0.3/pcmcia-cs-patches/README
> 	hostap-0.0.3/pcmcia-cs-patches/hostap-pcmcia-cs-3.1.34.patch
> 	hostap-0.0.3/sniff/
> 	hostap-0.0.3/sniff/Makefile
> 	hostap-0.0.3/sniff/README
> 	hostap-0.0.3/sniff/ieee80211.h
> 	hostap-0.0.3/sniff/management.c
> 	hostap-0.0.3/sniff/wlansniff.c
> 	hostap-0.0.3/utils/
> 	hostap-0.0.3/utils/.cvsignore
> 	hostap-0.0.3/utils/Makefile
> 	hostap-0.0.3/utils/hostap_crypt_conf.c
> 	hostap-0.0.3/utils/hostap_diag.c
> 	hostap-0.0.3/utils/hostap_io_debug.c
> 	hostap-0.0.3/utils/hostap_rid.c
> 	hostap-0.0.3/utils/prism2_param
> 	hostap-0.0.3/utils/prism2_srec.c
> 	hostap-0.0.3/utils/split_combined_hex
> 	hostap-0.0.3/utils/util.c
> 	hostap-0.0.3/utils/util.h
> 	hostap-0.0.3/utils/wireless_copy.h
>
> Regards,
> db
>
>