pcmcia_cs vs orinoco_cs

[Madhusudan Singh]

Hi
    My webpage might help :

    http://www.eecs.umich.edu/~chhabra/netgearwireless.html

    My card is a Netgear MA401 which is also a Prism 2.5 card. You will 
have to either get rid of the orinoco_cs driver by recompiling your 
kernel or edit the corresponding config files (listed above) to choose 
the hostap_cs one instead.

HTH,

MS

Dan Hackney wrote:

>I'm a bit confused regarding the PCMCIA_PATH directive for setting up
>the hostap driver.  My machine does not appear to use the pcmcia_cs
>module, but the orinoco_cs one instead.  Here is an lsmod and a modprobe
>pcmcia_cs for you:
>
>wdlinux:~# lsmod
>Module                  Size  Used by    Not tainted
>orinoco_cs              4520   0  (unused)
>orinoco                29952   0  [orinoco_cs]
>hermes                  5888   0  [orinoco_cs orinoco]
>nls_iso8859-1           2848   1  (autoclean)
>isofs                  25664   1  (autoclean)
>zlib_inflate           18752   0  (autoclean) [isofs]
>loop                    8912   3  (autoclean)
>tulip                  40416   1  (autoclean)
>af_packet              12904   1  (autoclean)
>reiserfs              177024   2  (autoclean)
>ds                      6528   1  [orinoco_cs]
>yenta_socket            9504   1
>pcmcia_core            38144   0  [orinoco_cs ds yenta_socket]
>unix                   14500   6  (autoclean)
>wdlinux:~# modprobe pcmcia_cs
>modprobe: Can't locate module pcmcia_cs
>
>The card is a demarctec pcmcia card, based on prism 2.5 chipset.
>
>Can anyone give me a push in the right direction?
>
>Note: please reply by email as I'm not sure I'm really on the list yet;
>after subscribing I got someone's vacation away message....?
>
>-Dan
>
>_______________________________________________
>HostAP mailing list
>HostAP at shmoo.com
>http://lists.shmoo.com/mailman/listinfo/hostap
>  
>