Resetting card problem

[Victor Aleo]

Hi all,

I have the next problem using 2 APs and 1 station configured as wlan1 
(all of them running the latest release hostap-2002-10-12.tar.gz): when 
the station (which is associated with one AP and sending data) is 
disassociated (upon a "Disassociation" message from the AP) most of the 
times produces a reset of the station card (wlan1).

Has been this problem solved in the last CVS version?

Thanks,

Victor

wlan1: LinkStatus=2 (Disconnected)
wlan1: LinkStatus: BSSID=xx:xx:xx:xx:xx:xx
wlan1: hfa384x_setup_bap - timeout after
wlan1: TXEXC - fid=0x0258 - could not read txdesc
wlan1: scheduled card reset
hostap_pci: wlan1: resetting card
wlan1: removed pending cmd_queue entry (type=1, cmd=0x010b, param0=0x0138)
prism2_hw_init()
prism2_hw_config: initialized in 17874 iterations
prism2_tx_timeout: wake up queue
wlan0: xx:xx:xx:xx:xx:xx auth (alg=0 trans#=1 stat=0 len=6fc=00b0) ==> 1 
(authentication denied)
wlan1: LinkStatus=1 (Connected)
wlan1: LinkStatus: BSSID=xx:xx:xx:xx:xx:xx