HostAP problem

[HostAP]

Jason Boxman ?rta:

>HostAP said:
>
>  
>
>>Hi,
>>
>>I have a debian woody with latest 2.4.20 and Lucent/Orinoco (avaya) 2.4
>>Ghz card in PCI->PCMCIA
>>converter handled by cardbus. (like laptop)
>>
>>I wish to make an access point with linux.
>>
>>I tried to install HostAP, but is not successfully:
>>
>>/etc/init.d/pcmcia restart
>>
>>/var/log/syslog:
>>.
>>.
>>.
>>hostap_cs: setting Vcc=50 (from config)
>>Checking CFTABLE_ENTRY 0x01 (default 0x01)
>>IO window settings: cfg->io.nwin=1 dflt.io.nwin=1
>>io->flags = 0x0046, io.base=0x0000, len=64
>>hostap_cs: index 0x01: Vcc 5.0, irq 11, io 0x0100-0x013f
>>hostap_cs: Registered netdevice wlan0
>>prism2_hw_init()
>>prism2_hw_config(): initialized 3664 iterations
>>wlan0: NIC: id=0x01 v4.2.1
>>wlan0: PRI: id=0x15 v4.2.1
>>wlan0: STA: id=0x1f v8.42.1
>>    
>>
>
>^^^^^^^^^^^^^^^^^^^^
>
>That's not a Prism2 card, is it?  The firmware versions are all wrong.
>
The kernel's module orinoco_cs runs succefully, but hermes module has 
benn loaded. Maybe is this problem ?

>
><snip>
>  
>
>>So i think my firmware not good, but it now downloaded from agere.com,
>>1.4-5.x has for everybody
>>What can i do ?
>>Where from can i to download good firmware or what kind of wireless card
>>good for me? (vendor & prod)
>>
>>Best Regards
>>
>>Laszlo Halasz
>>Hungary
>>
>>
>>    
>>
>
>
>_______________________________________________
>HostAP mailing list
>HostAP at shmoo.com
>http://lists.shmoo.com/mailman/listinfo/hostap
>
>  
>