HostAP problem

[HostAP]

Hi,

I have a debian woody with latest 2.4.20 and Lucent/Orinoco (avaya) 2.4 Ghz card in PCI->PCMCIA
converter handled by cardbus. (like laptop)

I wish to make an access point with linux.

I tried to install HostAP, but is not successfully:

/etc/init.d/pcmcia restart

/var/log/syslog:
.
.
.
hostap_cs: setting Vcc=50 (from config)
Checking CFTABLE_ENTRY 0x01 (default 0x01)
IO window settings: cfg->io.nwin=1 dflt.io.nwin=1
io->flags = 0x0046, io.base=0x0000, len=64
hostap_cs: index 0x01: Vcc 5.0, irq 11, io 0x0100-0x013f
hostap_cs: Registered netdevice wlan0
prism2_hw_init()
prism2_hw_config(): initialized 3664 iterations
wlan0: NIC: id=0x01 v4.2.1
wlan0: PRI: id=0x15 v4.2.1
wlan0: STA: id=0x1f v8.42.1
wlan0: CMD=0x0121 => res=0x7f, resp0=0x0004
wlan0: hfa384x_set_rid: CMDCODE_ACCESS_FAILED (res=127, rid=fc33, len=2)
wlan0: Beacon interval setting to 100 failed
wlan0: CMD=0x0121 => res=0x7f, resp0=0x0004
wlan0: hfa384x_set_rid: CMDCODE_ACCESS_FAILED (res=127, rid=fcb3, len=2)
wlan0: Basic rates setting failed
wlan0: CMD=0x0121 => res=0x7f, resp0=0x0004
wlan0: hfa384x_set_rid: CMDCODE_ACCESS_FAILED (res=127, rid=fcb4, len=2)
wlan0: Suppoted rates setting failed
wlan0: CMD=0x0121 => res=0x7f, resp0=0x0004
wlan0: hfa384x_set_rid: CMDCODE_ACCESS_FAILED (res=127, rid=fc10, len=2)
wlan0: DTIM period setting to 1 failed
executing './network start wlan0'
.
.
.

So i think my firmware not good, but it now downloaded from agere.com, 1.4-5.x has for everybody
What can i do ?
Where from can i to download good firmware or what kind of wireless card good for me? (vendor & prod)

Best Regards

Laszlo Halasz
Hungary