Error loading wireless card

Wed Feb 26 04:03:26 PST 2003

Hello, somebody know why when PCMCIA starts, dmesg show this:

Linux Kernel Card Services 3.1.22
  options:  [pci] [cardbus] [pm]
PCI: Found IRQ 10 for device 00:09.0
Yenta IRQ list 0000, PCI irq10
Socket status: 30000410
cs: IO port probe 0x0c00-0x0cff: excluding 0xc00-0xc1f
cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x290-0x297 0x300-0x307 0x378-0x37f 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
wvlan_cs: WaveLAN/IEEE PCMCIA driver v1.0.6
wvlan_cs: (c) Andreas Neuhaus <andy at fasta.fh-dortmund.de>
wvlan_cs: index 0x01: Vcc 5.0, irq 10, io 0x0100-0x013f
wvlan_cs: Registered netdevice eth1
wvlan_cs: MAC address on eth1 is 00 02 2d 2b bb 21 
wvlan_cs: Found firmware 0x60010 (vendor 1) - Firmware capabilities : 1-2-1-1-1
wvlan_cs: MAC address on eth1 is 00 02 2d 2b bb 21 
wvlan_cs: Found firmware 0x60010 (vendor 1) - Firmware capabilities : 1-2-1-1-1
wvlan_cs: MAC address on eth1 is 00 02 2d 2b bb 21 
wvlan_cs: Found firmware 0x60010 (vendor 1) - Firmware capabilities : 1-2-1-1-1
NETDEV WATCHDOG: eth1: transmit timed out
wvlan_cs: eth1 Tx timed out! Resetting card
wvlan_cs: MAC address on eth1 is 00 02 2d 2b bb 21 
wvlan_cs: Found firmware 0x60010 (vendor 1) - Firmware capabilities : 1-2-1-1-1

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/hostap/attachments/20030226/74abc8db/attachment.htm 