WLI-PCM-L11G Supported?

[Max Lock]

On Mon, 17 Feb 2003 16:51:21 +0530
"Peyush Agarwal" <peyush at tataelxsi.co.in> wrote:

> Buffalo WLI-PCM-L11GP doesn't have a Prism chipset
> and so it cannot be configured as an AP using the hostap driver !

 Thanks Peyush, can I just confirm that, as cardmgr is picking it up as
a Prism 2 chipset? 

 -Max

Feb 17 10:58:34 ranger cardmgr[213]: socket 1: Intersil PRISM2 11 Mbps
Wireless Adapter
Feb 17 10:58:35 ranger cardmgr[213]: executing:
'modprobe orinoco_cs' 
Feb 17 10:58:35 ranger kernel: hermes.c: 5 Apr
2002 David Gibson <hermes at gibson.dropbear.id.au> 
Feb 17 10:58:35 ranger kernel: orinoco.c 0.11b (David Gibson
<hermes at gibson.dropbear.id.au> and others) 
Feb 17 10:58:35 ranger kernel: orinoco_cs.c 0.11b (David Gibson
<hermes at gibson.dropbear.id.au> and others) 
Feb 17 10:58:35 ranger kernel: eth1: Station identity
001f:0001:0006:0010
Feb 17 10:58:35 ranger kernel: eth1: Looks like a Lucent/Agere firmware
version 6.16
Feb 17 10:58:35 ranger kernel: eth1: Ad-hoc demo mode supported 
Feb 17 10:58:35 ranger kernel: eth1: IEEE standard IBSS ad-hoc mode
supported
Feb 17 10:58:35 ranger kernel: eth1: WEP supported, 104-bit key 
Feb 17 10:58:35 ranger kernel: eth1: MAC address 00:02:2D:3E:8A:AD 
Feb 17 10:58:35 ranger kernel: eth1: Station name "HERMES I" 
Feb 17 10:58:35 ranger kernel: eth1: ready Feb 17 10:58:35 ranger
cardmgr[213]: executing: './network start eth1' 
Feb 17 10:58:35 ranger kernel: eth1: index 0x01: Vcc 5.0, irq 3, io
0x0100-0x013f


-- 
Are you the police?
No ma'am, we're sysadmins.