DWL-650 rev K on RH9

[Robert Kohler]

Does your hostAP code work for the PCMCIA card 11Mb, DWL-650 rev K?

I found ref to DWL-650 working, but after installing, I found ref
to /etc/pcmcia/hostap.conf using rev D.

For my tests, I have been unable to get it to recognize a driver.
Here is what I have sone so far.

RH9 full install.
Recompiled kernel 2.4.20-19.9 without PCMCIA support.
Installed pcmcia-cs-3.2.4 .
	Updated /etc/sysconfig/pcmcia
...
PCMCIA=yes
PCIC=i82365
PCIC_OPTS=
CORE_OPTS=
...

Installed hostap-0.0.4
	Ran "make pccard"

Copied /etc/pcmcia/hostap.conf to /etc/pcmcia/config
as it appears this is what cardmgr reads.

Restarted pcmcia services via /etc/init.d/pcmcia restart.

Messages I get in /var/log/messages when inserting card

Aug 12 22:49:13 roblap kernel:   O2Micro OZ6912 rev 00 PCI-to-CardBus at 
slot 00:0a, mem 0xd0003000
Aug 12 22:49:13 roblap kernel:     host opts [0]: [pci/way] [pci irq 11] 
[lat 64/176] [bus 3/3]
Aug 12 22:49:13 roblap kernel:     PCI irq 11 test failed
Aug 12 22:49:13 roblap kernel:     ISA irqs (default) = 3,4,7,9 polling 
interval = 1000 ms
Aug 12 22:49:13 roblap cardmgr[3773]: watching 1 sockets
Aug 12 22:49:13 roblap cardmgr[3774]: starting, version is 3.2.4
Aug 12 22:49:14 roblap kernel: cs: cb_alloc(bus 3): vendor 0x104c, 
device 0x8400Aug 12 22:49:14 roblap kernel: cs: could not allocate 4K 
memory for CardBus socket 0
Aug 12 22:49:14 roblap cardmgr[3774]: unsupported card in socket 0
Aug 12 22:49:14 roblap cardmgr[3774]:   no product info available
Aug 12 22:49:14 roblap cardmgr[3774]:   PCI id: 0x104c, 0x8400

Does this mean my card uses diff drivers.??

I noticed on D-Link's web site, they have drivers for WinXP and stress 
to NOT install the wrong DWL-650 driver rev. "D" vs. "K".  They say this
does not work and may possibly damage card inoperatable...

Anyone know what kind of chipset this card has?

TIA

Robert