fw problem

[Tomas Charvat]

this was a bit too much for me :)

[root at brouter utils]# ./prism2_srec -r PK010101.HEX SF010704.HEX
srec summary for SF010704.HEX
Component: 0x001f 1.7.4 (station firmware)

ioctl: No such device
Missing wlan component info
Could not read wlan RIDs
[root at brouter utils]# ./prism2_srec -r wlan0 PK010101.HEX SF010704.HEX
srec summary for PK010101.HEX
Component: 0x0015 1.1.1 (primary firmware)

srec summary for SF010704.HEX
Component: 0x001f 1.7.4 (station firmware)


Verifying update compatibility and combining data:
Plug record length mismatch (PDR=0x0001): 12 != 16
==> extend from default
PRI: old iface 1:4-4 new iface 1:4-4
Allowing S3 overlap due to CRC-16 signature at 0x007e17fe (was: ffff)

This image is not meant to be downloaded to volatile memory.
Incompatible update data.

my Syslog

Aug  5 00:48:09 brouter kernel: prism2_download: dl_cmd=3
start_addr=0x00000000 num_areas=5
Aug  5 00:48:09 brouter kernel:   area 0: addr=0x007e0000 len=2902
ptr=0x08052690
Aug  5 00:48:09 brouter kernel:   area 1: addr=0x007e0c00 len=2336
ptr=0x080531f0
Aug  5 00:48:09 brouter kernel:   area 2: addr=0x007e17fe len=51934
ptr=0x08062860
Aug  5 00:48:09 brouter kernel:   area 3: addr=0x007f0800 len=3974
ptr=0x080618d0
Aug  5 00:48:09 brouter kernel:   area 4: addr=0x007fe000 len=3270
ptr=0x08051480
Aug  5 00:48:09 brouter kernel: wlan0: non-volatile downloading not enabled
Aug  5 00:50:50 brouter modprobe: modprobe: Can't locate module PK010101.HEX


i have Z com Xi 626, and i used same FW in all cards, but i flashed them
under Win, but this one must be done remote
latest CVS (15 mins old)

any help is welcome

tomas