help me please

[Jarmie Espuerta]

helo im new on the mailing list. and im very desperate. i cant run my 
hostap Zcomax prism 2.5 card on my pc. im using the driver 
hostap-2002-10-12 and the pcmcia-cs-3.1.31 and still not running. can 
somebody help me with the proper procedures on how to install it. im 
using the documentation made by hiraj bhutan.

my card is a Zcomax prism 2.5, and is inserted on a plx(pci to pcmcia 
adapter).  what are the modules tha t should be loaded or should i 
expected to be loaded?

 when i did the lsmod in my system, here is what i get

Module                      Size         Used  by        Not tainted
hostap_cs                 44648           0    [unused]
hostap                   60004            0    [hostap_cs]       
hostap_crypt              2342            0    
[hostap]
\ds                     8192 
hostap-cs]
i82365                    26384          1           
pcmcia_core             49600           0            
[hostap_cs ds i82365]

but why is that the modules loaded is still hostap_cs when in fact i did 
the 'make install_plx'.  supposedly i should expect the hostap_plx to be 
loaded instead hostap_cs when i execute the lsmod. there was no error in 
the 'make install_plx' but when i did the 'modprobe hostap_plx' there 
was an error saying "insmod hostap_plx failed".

and  still no mac address everytime i reinsert the card.  thank you once 
again.


i need all the help i can get. thank you.