hostap can not relays the frames between win2k client and freeradius ??

[tan keen]

hello,

 I have built up  802.1x  by linux client xsupplicant  & hostap & freeradius ,then  i replace the xsupplicant with winXP client  , it all work fine !

but,now  i    followed the http://support.microsoft.com/default.aspx?scid=kb;en-us;313664    to replace winXP with Win2k . (  have used  win2000 SP3 and have install the win2000 client downloading from MS's web site  and start up the wareless server ... ) It seems there is something wrong when  win2k transmit eap frames with hostap  !

   why?  i have forgoten doing something important ?

./hostap -x  -d -o 127.0.0.1 -a 127.0.0.1 -s whatever  wlan0

i got:

Opening raw packet socket for ifindex 5
Using interface wlan0ap with hwaddr 00:40:05:af:05:14 and ssid 'test'
Flushing old station entries
Received 30 bytes management frame
MGMT
mgmt::auth
authentication: STA=00:40:05:af:05:2e auth_alg=0 auth_transaction=1 status_code=0
  New STA
Station 00:40:05:af:05:2e authenticated (open system)
Received 40 bytes management frame
MGMT
mgmt::assoc_req
association request: STA=00:40:05:af:05:2e capab_info=0x01 listen_interval=1
  new AID 1
Station 00:40:05:af:05:2e associated (aid 1)
IEEE 802.1X: Start authentication for new station 00:40:05:af:05:2e
IEEE 802.1X: 00:40:05:af:05:2e AUTH_PAE entering state INITIALIZE
IEEE 802.1X: 00:40:05:af:05:2e BE_AUTH entering state INITIALIZE
IEEE 802.1X: 00:40:05:af:05:2e REAUTH_TIMER entering state INITIALIZE
IEEE 802.1X: 00:40:05:af:05:2e AUTH_KEY_TX entering state NO_KEY_TRANSMIT
IEEE 802.1X: 00:40:05:af:05:2e AUTH_PAE entering state DISCONNECTED
IEEE 802.1X: Unauthorizing station 00:40:05:af:05:2e
IEEE 802.1X: Sending canned EAP packet FAILURE to 00:40:05:af:05:2e (identifier 0)
IEEE 802.1X: 00:40:05:af:05:2e BE_AUTH entering state IDLE
IEEE 802.1X: 00:40:05:af:05:2e REAUTH_TIMER entering state INITIALIZE
IEEE 802.1X: 00:40:05:af:05:2e AUTH_PAE entering state CONNECTING
IEEE 802.1X: Sending EAP Request-Identity to 00:40:05:af:05:2e (identifier 1)
IEEE 802.1X: 00:40:05:af:05:2e REAUTH_TIMER entering state INITIALIZE
IEEE 802.1X: 00:40:05:af:05:2e REAUTH_TIMER entering state INITIALIZE
IEEE 802.1X: 00:40:05:af:05:2e REAUTH_TIMER entering state INITIALIZE
IEEE 802.1X: 00:40:05:af:05:2e AUTH_PAE entering state CONNECTING
IEEE 802.1X: Sending EAP Request-Identity to 00:40:05:af:05:2e (identifier 1)
IEEE 802.1X: 00:40:05:af:05:2e REAUTH_TIMER entering state INITIALIZE
IEEE 802.1X: 00:40:05:af:05:2e REAUTH_TIMER entering state INITIALIZE
IEEE 802.1X: 00:40:05:af:05:2e REAUTH_TIMER entering state INITIALIZE
IEEE 802.1X: 00:40:05:af:05:2e REAUTH_TIMER entering state INITIALIZE
Signal 2 received - terminating
Flushing old station entries
Deauthenticate all stations

============================

run the freeradius ,i got :   it seem he have not got some  frames from  hostap!

... ......... 

.........
 radutmp: callerid = yes
Module: Instantiated radutmp (radutmp) 
 main: smux_password = ""
 main: snmp_write_access = no
SMUX connect try 1
Can't connect to SNMP agent with SMUX: Connection refused
Listening on IP address *, ports 1812/udp and 1813/udp, with proxy on 1814/udp.
Ready to process requests.

=================

by the way , i am using d-link dwl 520 adaptor .

                  thanks!!



---------------------------------
Do You Yahoo!?
"?????KTV, ????????OK~~"
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.shmoo.com/pipermail/hostap/attachments/20030407/0eb8fe01/attachment.htm