watch dog time out

[박흥열]

Dear all

Sum time the hostap stop the card service by transmit timed out error..
I was downloading some stream file.. after a few hours.. about 2,3 hours..

hostap stop by bellow debugging message.. 

Anyone comment me about it ? Thanks.
Best Regards 

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
NETDEV WATCHDOG: wlan0: transmit timed out
wlan0 Tx timed out! Resetting card
hostap_cs: wlan0: resetting card
cs: read_cis_mem(1, 0x1f0, 1)
cs:  0x41 0x60 0x76 0xfe ...
cs: write_cis_mem(1, 0x1f0, 1)
wlan0: Interrupt, but SWSUPPORT0 does not match: FFFF != 8A32 - card removed?
IRQ LOCK: IRQ6 is locking the system, disabled
cs: write_cis_mem(1, 0x1f0, 1)
prism2_hw_init()
NETDEV WATCHDOG: wlan0: transmit timed out
wlan0 Tx timed out! Resetting card
wlan0: Port type setting to 6 failed
init led timer 
NETDEV WATCHDOG: wlan0: transmit timed out
wlan0 Tx timed out! Resetting card
prism2_tx_timeout: wake up queue
hostap_cs: wlan0: resetting card
cs: read_cis_mem(1, 0x1f0, 1)
cs:  0x41 0x60 0x76 0xfe ...
cs: write_cis_mem(1, 0x1f0, 1)
cs: write_cis_mem(1, 0x1f0, 1)
prism2_hw_init()
wlan0: Port type setting to 6 failed
init led timer 
NETDEV WATCHDOG: wlan0: transmit timed out
wlan0 Tx timed out! Resetting card
wlan0: MAC port 0 enabling failed
prism2_tx_timeout: wake up queue
hostap_cs: wlan0: resetting card
cs: read_cis_mem(1, 0x1f0, 1)
cs:  0x41 0x60 0x76 0xfe ...
cs: write_cis_mem(1, 0x1f0, 1)
cs: write_cis_mem(1, 0x1f0, 1)
prism2_hw_init()
wlan0: MAC data length setting to 2304 failed
init led timer 
wlan0: MAC port 0 enabling failed