d-link dwl-660

[Eerin Rosenström]

What is broblem with dwl-660?


Using /lib/modules/2.4.17/pcmciaIntel PCIC probe: /i82365.o

  Vadem VG-469 rev 00 ISA-to-PCMCIA at port 0x3e2 ofs 0x00
    host opts [0]: none
    host opts [1]: none
    ISA irqs (scanned) = 9,10,11,12,14,15 status change on irq 15
Using /lib/modules/2.4.17/pcmcia/ds.o
Using /lib/modules/2.4.17/pcmcia/hostap_cs.o
hostap_cs: hostap_cs.c 0.0.0 2002-05-19 (SSH Communications Security Corp,
Jouni Malinen)
hostap_cs: (c) SSH Communications Security Corp <jkm at ssh.com>
Jan  1 00:00:07 cardmgr[62]: starting, version is 3.1.28
Jan  1 00:00:07 cardmgr[62]: watching 2 sockets
Jan  1 00:00:07 cs: memory probe 0x0d0000-0x0dffff:cardmgr[62]: ini clean.
tializing socket 0
Jan  1 00:00:07 cardmgr[62]: socket 0: PRISM2 IEEE 802.11 PC-CARD
cs: IO port probe 0x0100-0x04ff: excluding 0x1f0-0x1f7 0x2e8-0x2ef
0x3c0-0x3e7 0x480-0x48f
cs: IO port probe 0x01f8-0x02e7: clean.
cs: IO port probe 0x02f0-0x03bf: clean.
cs: IO port probe 0x03e8-0x047f: clean.
cs: IO port probe 0x0490-0x04ff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0c00-0x0cff: clean.
hostap_cs: index 0x01: Vcc 5.0, irq 9, io 0x0140-0x017f
hostap_cs: Registered netdevice wlan0
wlan0: NIC: id=0x01 v5.0.4
wlan0: PRI: id=0x15 v4.4.1
wlan0: STA: id=0x1f v8.10.1
wlan0: CMD=0x0121 => res=0x7f, resp0=0x0004
wlan0: hfa384x_set_rid: CMDCODE_ACCESS_WRITE failed (res=127)
wlan0: Beacon interval setting to 100 failed
wlan0: CMD=0x0121 => res=0x7f, resp0=0x0004
wlan0: hfa384x_set_rid: CMDCODE_ACCESS_WRITE failed (res=127)
wlan0: Basic rates setting failed
wlan0: CMD=0x0121 => res=0x7f, resp0=0x0004
wlan0: hfa384x_set_rid: CMDCODE_ACCESS_WRITE failed (res=127)
wlan0: Supported rates setting failed
wlan0: CMD=0x0121 => res=0x7f, resp0=0x0004
wlan0: hfa384x_set_rid: CMDCODE_ACCESS_WRITE failed (res=127)
wlan0: DTIM period setting to 1 failed
wlan0: CMD=0x0121 => res=0x7f, resp0=0x0004
wlan0: hfa384x_set_rid: CMDCODE_ACCESS_WRITE failed (res=127)
wlan0: could not configure encryption
Jan  1 00:00:08 cardmgr[62]: executing: './network start wlan0'
Jan  1 00:00:08 cardmgr[62]: + ./network: No such file or directory
Jan  1 00:00:08 cardmgr[62]: start cmd exited with status 127
Jan  1 00:00:08 cardmgr[wlan0: hfa384x_cmd - timeout2 - reg=0x8000
62]: exiting
wlan0: hfa384x_cmd - timeout2 - reg=0x8000
Error for wirelewlan0: hfa384x_cmd - timeout - reg=0x8000
wlan0: hfa384x_set_rid: CMDCODE_ACCESS_WRITE failed (res=-110)
ss request "Set hostap_cs: wlan0: resetting card
Tx Power" (8B26) :
    SET failed on device wlawlan0: CMD=0x0121 => res=0x7f, resp0=0x0004
wlan0: hfa384x_set_rid: CMDCODE_ACCESS_WRITE failed (res=127)
n0 ; Operation nwlan0: Beacon interval setting to 100 failed
ot supported on wlan0: CMD=0x0121 => res=0x7f, resp0=0x0004
wlan0: hfa384x_set_rid: CMDCODE_ACCESS_WRITE failed (res=127)
transport endpoiwlan0: Basic rates setting failed
nt.
wlan0: CMD=0x0121 => res=0x7f, resp0=0x0004
wlan0: hfa384x_set_rid: CMDCODE_ACCESS_WRITE failed (res=127)
wlan0: Supported rates setting failed
wlan0: CMD=0x0121 => res=0x7f, resp0=0x0004
wlan0: hfa384x_set_rid: CMDCODE_ACCESS_WRITE failed (res=127)
wlan0: DTIM period setting to 1 failed
wlan0: CMD=0x0121 => res=0x7f, resp0=0x0004
wlan0: hfa384x_set_rid: CMDCODE_ACCESS_WRITE failed (res=127)
wlan0: could not configure encryption
wlan0: TXRateControl setting to 0x8 failed


This is from openAP ksmith 13. friday version.

-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*

                    ****  Eerin Rosenstr?m          ****
                    **    Servinmaijantie 12 F 77     **
                    **    02150 Espoo                 **
                    **    p. +358 9 4682997           **
                    ****  p.+358 40 5205030         ****

-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*