hostap & channel bonding
Jason Straight
jason
Tue Nov 12 21:11:54 PST 2002
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I see you've got a good channel spread - that's good. Try setting your AP side
rate to 5.5M and see if you still get loss.
On Tuesday 12 November 2002 21:15, Christian Zoffoli wrote:
> Jouni Malinen ha scritto:
> > On Wed, Nov 13, 2002 at 01:56:38AM +0100, Christian Zoffoli wrote:
> >>'client' side
> >>---
> >>wlan0 IEEE 802.11-b ESSID:"xmerlin"
> >> Mode:Managed Frequency:2.412GHz Access Point:
> >> 00:02:6F:01:86:0A
> >>
> >>
> >>wlan1 IEEE 802.11-b ESSID:"xmerlin"
> >> Mode:Managed Frequency:2.412GHz Access Point:
> >> 00:02:6F:01:86:0A
> >
> > Both of your client cards are using the same channel.. You should make
> > sure that this does not happen, e.g., by using different SSID for the AP
> > interfaces.
>
> using different SSID client wlans works at 2Mbit/s and i have many
> packet loss.
>
>
> server
> ---
> wlan0 IEEE 802.11-b ESSID:"xmerlin"
> Mode:Master Frequency:2.412GHz Access Point: 00:02:6F:01:86:0A
> Bit Rate=11Mb/s Tx-Power=10 dBm Sensitivity=1/3
> Retry min limit:8 RTS thr:off Fragment thr:off
> Encryption key:off
> Power Management:off
> Link Quality:0 Signal level:0 Noise level:0
> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
> Tx excessive retries:0 Invalid misc:0 Missed beacon:0
>
> wlan1 IEEE 802.11-b ESSID:"xmerlin2"
> Mode:Master Frequency:2.437GHz Access Point: 00:02:6F:01:86:09
> Bit Rate=11Mb/s Tx-Power=10 dBm Sensitivity=1/3
> Retry min limit:8 RTS thr:off Fragment thr:off
> Encryption key:off
> Power Management:off
> Link Quality:0 Signal level:0 Noise level:0
> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
> Tx excessive retries:0 Invalid misc:0 Missed beacon:0
> ---
>
>
> client
> ---
> wlan0 IEEE 802.11-b ESSID:"xmerlin"
> Mode:Managed Frequency:2.412GHz Access Point:
> 00:02:6F:01:86:0A Bit Rate:2Mb/s Tx-Power=10 dBm Sensitivity=1/3
> Retry min limit:8 RTS thr:off Fragment thr:off
> Encryption key:off
> Power Management:off
> Link Quality:72/92 Signal level:-58 dBm Noise level:-100 dBm
> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
> Tx excessive retries:0 Invalid misc:0 Missed beacon:0
>
> wlan1 IEEE 802.11-b ESSID:"xmerlin2"
> Mode:Managed Frequency:2.437GHz Access Point:
> 00:02:6F:01:86:09 Bit Rate:2Mb/s Tx-Power=10 dBm Sensitivity=1/3
> Retry min limit:8 RTS thr:off Fragment thr:off
> Encryption key:off
> Power Management:off
> Link Quality:92/92 Signal level:-40 dBm Noise level:-100 dBm
> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
> Tx excessive retries:0 Invalid misc:0 Missed beacon:0
>
>
> PING 10.0.6.150 (10.0.6.150): 56 data bytes
> 64 bytes from 10.0.6.150: icmp_seq=2 ttl=64 time=1.8 ms
> 64 bytes from 10.0.6.150: icmp_seq=6 ttl=64 time=2.5 ms
> 64 bytes from 10.0.6.150: icmp_seq=10 ttl=64 time=2.2 ms
> 64 bytes from 10.0.6.150: icmp_seq=14 ttl=64 time=2.1 ms
> 64 bytes from 10.0.6.150: icmp_seq=18 ttl=64 time=2.4 ms
> 64 bytes from 10.0.6.150: icmp_seq=22 ttl=64 time=2.4 ms
> 64 bytes from 10.0.6.150: icmp_seq=26 ttl=64 time=1.9 ms
> 64 bytes from 10.0.6.150: icmp_seq=30 ttl=64 time=2.2 ms
>
> --- 10.0.6.150 ping statistics ---
> 32 packets transmitted, 8 packets received, 75% packet loss
> round-trip min/avg/max = 1.8/2.1/2.5 ms
>
> ---
>
>
>
> _______________________________________________
> HostAP mailing list
> HostAP at shmoo.com
> http://lists.shmoo.com/mailman/listinfo/hostap
- --
"Having no way as way, having no limitation as limitation."
Bruce Lee
PGP Keys: http://www.JeetKuneDoMaster.net/~junfan/pubkey.asc
Jason Straight <jason at JeetKuneDoMaster.net>
ICQ: 1796276
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)
iQCVAwUBPdHfHhFHZPcobeHxAQKanAQAlaJ8ZzK1pTqg0+4xOx+6C9W++ghshkn/
OLTN8Vdv9xqE0lrsoAq2pq6jJQ213sevxFM44muUKueikMCa2A0ow5EeJCZ52yH9
UVvL8bew4PIDNjgpGQGUDA2Hcdu3uTCzsva4D3j8X8yB4JkPQ9hqtRNV/RBmFb11
gt7k23nxC3w=
=5mYK
-----END PGP SIGNATURE-----
More information about the Hostap
mailing list