problems with Linksys WMP11

[rpgoldman at real-time.com]

Jason Boxman writes:
 > On Friday 20 December 2002 10:26 am, rpgoldman at real-time.com wrote:
 > > Jouni Malinen writes:
 > >  > On Fri, Dec 20, 2002 at 12:08:40AM -0500, Jason Boxman wrote:
 > >  > > The reported issues with 1.4.2 are indeed true.
 > >  >
 > >  > Yes, but they should not cause problems when testing the card in
 > >  > managed mode as was the case in the original question.
 > >
 > > Then if that's not the problem, here's what I'm trying:
 > >
 > > I start up the card in /etc/rc.local (if I can get it working, I can
 > > move the initialization to a more appropriate place) trying the
 > > following:
 > >
 > <snip>
 > > Again, my profuse apologies if I'm just doing something obviously
 > > stupid.  And my profound gratitude to anyone who can set me straight!
 > 
 > Have you tired doing it with WEP disabled and Open access on the AP first?  


I'll look into that, but I don't think it can be ALL the problem,
since the card comes up in a wacko state.  I.e., if you look at my
first iwconfig outputs, which I captured right after boot-up, it's
clear that something's going wrong and the card is not accepting the
initial iwconfig commands in the /etc/rc.local file.  


Thanks,
Robert