TXPOWER has no impact on ZCOM XI-325H?

[Vladimir Ivaschenko]

XI-325H uses its own amplifier design and you cannot control it's output
power (at least it's not documented). 

Sat, Dec 14, 2002 at 02:53:49AM -0100 Pavel Vondricka wrote about TXPOWER has no impact on ZCOM XI-325H?

> Hi!
> I have a problem with my ZCOM PCMCIA card XI-325H. It seems everything works, 
> I just couldn't measure any changes in the strength of received signal on 
> another computer when I changed the TXPOWER setting in the master mode. The 
> numbers change in my iwconfig, but the other computer receives always the 
> same signal.
> 
> I'm using kernel 2.4.20 (with standard WE14) with an ACPI patch (because of my 
> notebook), pcmcia-cs 3.2.3, wireless tools v25. The base of the system is 
> RedHat 8.0.
> 
> Any ideas what's wrong? Is it possible to change the txpower dynamically or do 
> I have to "restart" or "reset" anything? What?
> 
> Thanks,
> Pavel
> 
> -- 
> ###########################################################################
> # mailto:Pavel.Vondricka at ff.cuni.cz / ICQ:143159880 
> # http://web.ff.cuni.cz/~vondric
> #
> # Muzete mi psat cesky s libovolnym kodovanim (UTF-8, ISO-8859-2,
> # windows-1250, atd. ...)
> ###########################################################################
> _______________________________________________
> HostAP mailing list
> HostAP at shmoo.com
> http://lists.shmoo.com/mailman/listinfo/hostap

-- 
Best Regards
Vladimir Ivaschenko
http://www.hazard.maks.net/