Hi all,<div><br></div><div>Im working on my own imx27 designed board and wanted to try barebox on it.Actually I'm trying it with the phytec board config and it seems to work fine booting on my nfs kernel and rootfs.</div>
<div>But when Im trying to boot from my 128MiB NAND memory then it doesn't work and there is no decompression stage from the kernel.</div><div>Here is what Im getting :</div><div><br></div><div><div>Board: Phytec phyCard-i.MX27</div>
<div>registered netconsole as cs1</div><div>cfi_probe: cfi_flash base: 0xc0000000 size: 0x02000000</div><div>NAND device: Manufacturer ID: 0x2c, Chip ID: 0xac (Micron NAND 512MiB 1,8V 8-bit)</div><div>Bad block table found at page 262080, version 0x01</div>
<div>Bad block table found at page 262016, version 0x01</div><div>Before PHY reset</div><div>After PHY reset</div><div>ULPI Vendor ID 0xffffff92 Product ID 0xffffff92</div><div>No ISP1504 found</div><div>ehci@ehci0: USB EHCI 1.00</div>
<div>ULPI Vendor ID 0xffffff92 Product ID 0xffffff92</div><div>No ISP1504 found</div><div>ehci@ehci1: USB EHCI 1.00</div><div>Malloc space: 0xa7a00000 -> 0xa7f00000 (size 5 MB)</div><div>Stack space : 0xa79f8000 -> 0xa7a00000 (size 32 kB)</div>
<div>running /env/bin/init...</div><div><br></div><div>Hit any key to stop autoboot: 1</div><div>booting kernel of type uImage from /dev/<a href="http://nand0.kernel.bb">nand0.kernel.bb</a></div><div>barebox:/ bootu /dev/<a href="http://nand0.kernel.bb">nand0.kernel.bb</a> </div>
<div>commandline: console=ttymxc0,115200 video=imxfb:Chimei-LW700AT9003</div><div>arch_number: 1698</div><div><br></div><div>It seems I'm getting some issues with my nand since when I tried to flash it and the erase task failed :</div>
<div><br></div><div>erasing partition /dev/<a href="http://nand0.kernel.bb">nand0.kernel.bb</a></div><div><br></div><div>erase: Invalid argument</div><div><br></div><div>flashing uImage-apf27 to /dev/<a href="http://nand0.kernel.bb">nand0.kernel.bb</a></div>
<div><br></div><div>TFTP from server 192.168.0.2 ('uImage-apf27' -> '/dev/<a href="http://nand0.kernel.bb">nand0.kernel.bb</a>')</div><div> #################################################################</div>
<div> #################################################################</div><div> #################################################################</div><div> #################################################################</div>
<div> #################################################################</div><div> #################################################################</div><div> #################################################################</div>
<div> #################################################################</div><div> #</div><div><br></div><div>How can I fix that ?</div><div>Thanks for the help. </div><div><br></div><div><br></div><div><br>
</div>-- <br>__________________________________<br><i><font face="'comic sans ms', sans-serif">Kamel BOUHARA</font></i><div>7 rue Jules César<div>02100 SAINT-QUENTIN<br>06.17.83.29.04<br><br></div></div><br>
</div>