Other architectures are supporting the uImage format used by barebox's 'bootm' command. x86 does'nt. So, we need a special command to be able to boot the x86 specific bzImage format. Signed-off-by: Juergen Beisert --- Documentation/commands.dox | 2 arch/x86/include/asm/syslib.h | 4 arch/x86/lib/Makefile | 1 arch/x86/lib/linux_start.S | 75 ++++++++ commands/Kconfig | 8 commands/Makefile | 1 commands/linux16.c | 363 ++++++++++++++++++++++++++++++++++++++++++ 7 files changed, 453 insertions(+), 1 deletion(-) Index: u-boot-2.0.0-rc10/commands/Kconfig =================================================================== --- u-boot-2.0.0-rc10.orig/commands/Kconfig +++ u-boot-2.0.0-rc10/commands/Kconfig @@ -219,6 +219,14 @@ config CMD_BOOTU compile in the 'bootu' command to start raw (uncompressed) Linux images +config CMD_LINUX16 + tristate + default y if X86 + prompt "linux16" + help + Compile the linux16 command to be able to boot bzImages + via real mode. + config CMD_RESET tristate prompt "reset" Index: u-boot-2.0.0-rc10/commands/Makefile =================================================================== --- u-boot-2.0.0-rc10.orig/commands/Makefile +++ u-boot-2.0.0-rc10/commands/Makefile @@ -1,4 +1,5 @@ obj-$(CONFIG_CMD_BOOTM) += bootm.o +obj-$(CONFIG_CMD_LINUX16) += linux16.o obj-$(CONFIG_CMD_LOADB) += loadb.o xyzModem.o obj-$(CONFIG_CMD_LOADY) += loadb.o xyzModem.o obj-$(CONFIG_CMD_LOADS) += loads.o Index: u-boot-2.0.0-rc10/commands/linux16.c =================================================================== --- /dev/null +++ u-boot-2.0.0-rc10/commands/linux16.c @@ -0,0 +1,363 @@ +/* + * Copyright (C) 2009 Juergen Beisert, Pengutronix + * + * In parts from the GRUB2 project: + * + * GRUB -- GRand Unified Bootloader + * Copyright (C) 1999,2000,2001,2002,2003,2004,2005,2007,2008 Free Software Foundation, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include +#include + +/** FIXME */ +#define LINUX_MAGIC_SIGNATURE 0x53726448 /* "HdrS" */ + +/** FIXME */ +#define LINUX_FLAG_BIG_KERNEL 0x1 + +/** FIXME */ +#define LINUX_BOOT_LOADER_TYPE 0x72 + +/** FIXME */ +#define LINUX_DEFAULT_SETUP_SECTS 4 + +/** FIXME */ +#define LINUX_MAX_SETUP_SECTS 64 + +/** FIXME */ +#define LINUX_OLD_REAL_MODE_SEGMT 0x9000 + +/** FIXME */ +#define LINUX_OLD_REAL_MODE_ADDR (LINUX_OLD_REAL_MODE_SEGMT << 4) + +/** FIXME */ +#define LINUX_HEAP_END_OFFSET (LINUX_OLD_REAL_MODE_SEGMT - 0x200) + +/** FIXME */ +#define LINUX_FLAG_CAN_USE_HEAP 0x80 + +/** Define kernel command lines's start offset in the setup segment */ +#define LINUX_CL_OFFSET 0x9000 + +/** Define kernel command lines's end offset */ +#define LINUX_CL_END_OFFSET 0x90FF + +/** FIXME */ +#define LINUX_CL_MAGIC 0xA33F + +/** FIXME */ +#define LINUX_SETUP_MOVE_SIZE 0x9100 + +/** Sector size */ +#define DISK_SECTOR_BITS 9 +#define DISK_SECTOR_SIZE 0x200 + +/** Where to load a bzImage */ +#define LINUX_BZIMAGE_ADDR 0x100000 + +struct linux_kernel_header { + /* first sector of the image */ + uint8_t code1[0x0020]; + uint16_t cl_magic; /**< Magic number 0xA33F */ + uint16_t cl_offset; /**< The offset of command line */ + uint8_t code2[0x01F1 - 0x0020 - 2 - 2]; + uint8_t setup_sects; /**< The size of the setup in sectors */ + uint16_t root_flags; /**< If the root is mounted readonly */ + uint16_t syssize; /**< obsolete */ + uint16_t swap_dev; /**< obsolete */ + uint16_t ram_size; /**< obsolete */ + uint16_t vid_mode; /**< Video mode control */ + uint16_t root_dev; /**< Default root device number */ + uint16_t boot_flag; /**< 0xAA55 magic number */ + + /* second sector of the image */ + uint16_t jump; /**< Jump instruction (this is code!) */ + uint32_t header; /**< Magic signature "HdrS" */ + uint16_t version; /**< Boot protocol version supported */ + uint32_t realmode_swtch; /**< Boot loader hook */ + uint16_t start_sys; /**< The load-low segment (obsolete) */ + uint16_t kernel_version; /**< Points to kernel version string */ + uint8_t type_of_loader; /**< Boot loader identifier */ +#define LINUX_LOADER_ID_LILO 0x0 +#define LINUX_LOADER_ID_LOADLIN 0x1 +#define LINUX_LOADER_ID_BOOTSECT 0x2 +#define LINUX_LOADER_ID_SYSLINUX 0x3 +#define LINUX_LOADER_ID_ETHERBOOT 0x4 +#define LINUX_LOADER_ID_ELILO 0x5 +#define LINUX_LOADER_ID_GRUB 0x7 +#define LINUX_LOADER_ID_UBOOT 0x8 +#define LINUX_LOADER_ID_XEN 0x9 +#define LINUX_LOADER_ID_GUJIN 0xa +#define LINUX_LOADER_ID_QEMU 0xb + uint8_t loadflags; /**< Boot protocol option flags */ + uint16_t setup_move_size; /**< Move to high memory size */ + uint32_t code32_start; /**< Boot loader hook */ + uint32_t ramdisk_image; /**< initrd load address */ + uint32_t ramdisk_size; /**< initrd size */ + uint32_t bootsect_kludge; /**< obsolete */ + uint16_t heap_end_ptr; /**< Free memory after setup end */ + uint8_t ext_loader_ver; /**< boot loader's extension of the version number */ + uint8_t ext_loader_type; /**< boot loader's extension of its type */ + char *cmd_line_ptr; /**< Points to the kernel command line */ + uint32_t initrd_addr_max; /**< Highest address for initrd */ +#if 0 + /* for the records only. These members are defined in + * more recent Linux kernels + */ + uint32_t kernel_alignment; /**< Alignment unit required by the kernel */ + uint8_t relocatable_kernel; /** */ + uint8_t min_alignment; /** */ + uint32_t cmdline_size; /** */ + uint32_t hardware_subarch; /** */ + uint64_t hardware_subarch_data; /** */ + uint32_t payload_offset; /** */ + uint32_t payload_length; /** */ + uint64_t setup_data; /** */ + uint64_t pref_address; /** */ + uint32_t init_size; /** */ +#endif +} __attribute__ ((packed)); + +/** + * Load an x86 Linux kernel bzImage and start it + * @param cmdtp FIXME + * @param argc parameter count + * @param argv list of parameter + * + * Loads an x86 bzImage, checks for its integrity, stores the two parts + * (setup = 'real mode code' and kernel = 'protected mode code') to their + * default locations, switches back to real mode and runs the setup code. + */ +static int do_linux16(cmd_tbl_t *cmdtp, int argc, char *argv[]) +{ + struct linux_kernel_header *lh = NULL; + int rc; + unsigned setup_sects; + unsigned real_mode_size; + size_t image_size; + const char *cmdline = getenv("bootargs"); + + if (argc < 2) { + perror("linux16"); + return 1; + } + + lh = read_file(argv[1], &image_size); + if (lh == NULL) { + printf("Cannot read file '%s'\n", argv[1]); + return 1; + } + + if (lh->boot_flag != 0xaa55) { + printf("File '%s' has invalid magic number\n", argv[1]); + rc = 1; + goto on_error; + } + + if (lh->setup_sects > LINUX_MAX_SETUP_SECTS) { + printf("File '%s' contains too many setup sectors\n", argv[1]); + rc = 1; + goto on_error; + } + + setup_sects = lh->setup_sects; + + printf("Found a %d.%d image header\n", lh->version >> 8, lh->version & 0xFF); + + if (lh->header == LINUX_MAGIC_SIGNATURE && lh->version >= 0x0200) { + /* kernel is recent enough */ + ; + if (!(lh->loadflags & LINUX_FLAG_BIG_KERNEL)) { + printf("Cannot load a classic zImage. Use a bzImage instead\n"); + goto on_error; + } + lh->type_of_loader = LINUX_BOOT_LOADER_TYPE; /* TODO */ + + if (lh->version >= 0x0201) { + lh->heap_end_ptr = LINUX_HEAP_END_OFFSET; + lh->loadflags |= LINUX_FLAG_CAN_USE_HEAP; + } + + if (lh->version >= 0x0202) + lh->cmd_line_ptr = (void*)(LINUX_OLD_REAL_MODE_ADDR + LINUX_CL_OFFSET); /* FIXME */ + else { + lh->cl_magic = LINUX_CL_MAGIC; + lh->cl_offset = LINUX_CL_OFFSET; + lh->setup_move_size = LINUX_SETUP_MOVE_SIZE; + } + } else { + printf("Kernel too old to handle\n"); + rc = 1; + goto on_error; + } + + if (strlen(cmdline) >= (LINUX_CL_END_OFFSET - LINUX_CL_OFFSET)) { + printf("Kernel command line exceeds the available space\n"); + rc = 1; + goto on_error; + } + + /* If SETUP_SECTS is not set, set it to the default. */ + if (setup_sects == 0) { + printf("Fixing setup sector count\n"); + setup_sects = LINUX_DEFAULT_SETUP_SECTS; + } + + if (setup_sects >= 15) { + void *src = lh; + if (lh->kernel_version != 0) + printf("Kernel version: '%s'\n", src + lh->kernel_version + DISK_SECTOR_SIZE); + } + + /* + * Size of the real mode part to handle in a separate way + */ + real_mode_size = (setup_sects << DISK_SECTOR_BITS) + DISK_SECTOR_SIZE; + + /* + * real mode space hole extended memory + * |---------------------------------------------->|----------->|------------------------------> + * 0 0xa0000 0x100000 + * <-1-|----------2-----------><-3- | + * 0x7e00 0x90000 + * <-4--|-5--> |---------6-------------> + * + * 1) real mode stack + * 2) barebox code + * 3) flat mode stack + * 4) realmode stack when starting a Linux kernel + * 5) Kernel's real mode setup code + * 6) compressed kernel image + */ + /* + * Parts of the image we know: + * - real mode part + * - kernel payload + */ + /* + * NOTE: This part is dangerous, as it copies some image content to + * various locations in the main memory. This could overwrite important + * data of the running barebox (hopefully not) + */ + /* copy the real mode part of the image to the 9th segment */ + memcpy((void*)LINUX_OLD_REAL_MODE_ADDR, lh, LINUX_SETUP_MOVE_SIZE); + + /* TODO add 'BOOT_IMAGE=' and 'auto' if no user intervention was done (in front of all other params) */ + /* copy also the command line into this area */ + memcpy((void*)(LINUX_OLD_REAL_MODE_ADDR + LINUX_CL_OFFSET), cmdline, strlen(cmdline) + 1); + printf("Using kernel command line: '%s'\n", cmdline); + + /* copy the compressed image part to its final address the setup code expects it + * Note: The protected mode part starts at offset (setup_sects + 1) * 512 + */ + memcpy((void*)LINUX_BZIMAGE_ADDR, ((void*)lh) + real_mode_size, image_size - real_mode_size); + + /* + * switch back to real mode now and start the real mode part of the + * image at address "(LINUX_OLD_REAL_MODE_ADDR >> 4) + 0x20:0x0000" + * which means "0x9020:0x000" -> 0x90200 + */ + bios_start_linux(LINUX_OLD_REAL_MODE_SEGMT); /* does not return */ + +on_error: + if (lh != NULL) + free(lh); + + return rc; +} + +static const __maybe_unused char cmd_linux16_help[] = +"Usage: linux16 \n" +"Boot a linux kernel via real mode code\n"; + + +U_BOOT_CMD_START(linux16) + .cmd = do_linux16, + .usage = "boot linux kernel", + U_BOOT_CMD_HELP(cmd_linux16_help) +U_BOOT_CMD_END + +/** + * @file + * @brief Boot support for Linux on x86 + */ + +/** + * @page linux16_command linux16: Boot a bzImage kernel on x86 + * + * Usage is: linux16 \ + * + * Boot a linux kernel via real mode code. Only kernel images in the + * @p bzImage format are supported. + */ + +/** + * @page x86_boot_preparation Linux Preparation on x86 + * + * Due to some real mode constraints, starting Linux is somehow tricky. + * Currently only @p bzImages are supported, because @p zImages would + * interfere with the @a barebox runtime. + * Also older load header versions than 2.00 aren't supported. + * + * The memory layout immediately before starting the Linux kernel: + * +@verbatim + real mode space hole extended memory + |---------------------------------------------->|----------->|------------------------------> + 0 0x7e00 0x90000 0xa0000 0x100000 + <-1-|----------2-----------><-3- | + <-4--|-5--> |---------6-------------> +@endverbatim + * + * @li 1 = @a barebox's real mode stack + * @li 2 = @a barebox's code + * @li 3 = @a barebox's flat mode stack + * @li 4 = real mode stack, when starting the Linux kernel + * @li 5 = Kernel's real mode setup code + * @li 6 = compressed kernel image + * + * A more detailed memory layout for kernel's real mode setup code + * +@verbatim + + 0x90000 0x97fff 0x99000 0x990ff + ---|------------------------------------------|----------------|--------------------| + |<-------- max setup code size ----------->|<--heap/stack-->|<-- command line -->| + +@endverbatim + * + * The regular entry point into the setup code is 0x90200 (2nd sector) + * + * To start the kernel, it's own setup code will be called. To do so, it + * must be called in real mode. So, @a barebox switches back to real mode + * a last time and does a jump to the setup code entry point. Now its up to + * the setup code to deflate the kernel, switching to its own protected mode + * setup and starting the kernel itself. + * + * @note This scenario only works, if a BIOS is still present. In this case + * there is no need for @a barebox to forward any system related information + * to the kernel. Everything is detected by kernel's setup code. + * + */ Index: u-boot-2.0.0-rc10/arch/x86/include/asm/syslib.h =================================================================== --- u-boot-2.0.0-rc10.orig/arch/x86/include/asm/syslib.h +++ u-boot-2.0.0-rc10/arch/x86/include/asm/syslib.h @@ -27,3 +27,7 @@ extern int bios_disk_rw_int13_extensions extern uint16_t bios_get_memsize(void); #endif + +#ifdef CONFIG_CMD_LINUX16 +extern void bios_start_linux(unsigned) __attribute__((regparm(1))); +#endif Index: u-boot-2.0.0-rc10/arch/x86/lib/Makefile =================================================================== --- u-boot-2.0.0-rc10.orig/arch/x86/lib/Makefile +++ u-boot-2.0.0-rc10/arch/x86/lib/Makefile @@ -6,3 +6,4 @@ obj-y += gdt.o obj-$(CONFIG_X86_BIOS_BRINGUP) += memory16.o obj-$(CONFIG_X86_BIOS_BRINGUP) += traveler.o obj-$(CONFIG_X86_BIOS_BRINGUP) += bios_disk.o +obj-$(CONFIG_CMD_LINUX16) += linux_start.o Index: u-boot-2.0.0-rc10/arch/x86/lib/linux_start.S =================================================================== --- /dev/null +++ u-boot-2.0.0-rc10/arch/x86/lib/linux_start.S @@ -0,0 +1,75 @@ +/* + * Copyright (C) 2009 Juergen Beisert, Pengutronix + * + * Mostly stolen from the GRUB2 project + * Copyright (C) 1999,2000,2001,2002,2003,2004,2005,2006,2007,2008 Free Software Foundation, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +/** + * @file + * @brief Start the Linux real mode setup code + * + * Note: These functions are running in flat and real mode. Due to some + * other restrictions these routines must running from an address + * space below 0x10000 + */ + +/* + * void bios_start_linux(unsigned segment) + * + */ +#ifndef DOXYGEN_SHOULD_SKIP_THIS + + .section .boot.text.bios_start_linux, "ax" + .code32 + .globl bios_start_linux + .type bios_start_linux, @function + + .extern prot_to_real + +bios_start_linux: + /* 'prot_to_real' eats our eax content */ + movl %eax, %ebx + addl $0x20, %eax + movw %ax, setup_seg + + call prot_to_real + + .code16 + + cli + /* all segment registers are using the same segment */ + movw %bx, %ss + movw %bx, %ds + movw %bx, %es + movw %bx, %fs + movw %bx, %gs + + /* stack for the setup code (end of heap) */ + movw $0x9000, %sp + + /* do an 'ljmp' and never return */ + .byte 0xea + .word 0 +setup_seg: + .word 0 + + .code32 + +#endif Index: u-boot-2.0.0-rc10/Documentation/commands.dox =================================================================== --- u-boot-2.0.0-rc10.orig/Documentation/commands.dox +++ u-boot-2.0.0-rc10/Documentation/commands.dox @@ -20,5 +20,5 @@ @li @subpage setenv_command @li @subpage sh_command @li @subpage unprotect_command - +@li @subpage linux16_command */ --