[RFC PATCH 0/6] Add Raspberry Pi 5 initial support

[Sascha Hauer]

On Tue, 01 Sep 2026 17:12:55 +0200, Andrei Lalaev wrote:
> This patchseries adds initial support of Raspberry Pi 5.
> Since the most peripheral is routed though RP1 south bridge,
> only debug UART and SD card are supported.
> 
> Boot log:
>   NOTICE:  BL31: v2.6(release):v2.6-240-gfc45bc492
>   NOTICE:  BL31: Built : 12:55:13, Dec  4 2024
> 
> [...]

Applied, thanks!

[1/6] mci: add driver for Broadcom SDHCI
      https://git.pengutronix.de/cgit/barebox/commit/?id=ee8c18d01137 (link may not be stable)
[2/6] ARM: rpi: add Raspberry Pi 5 support
      https://git.pengutronix.de/cgit/barebox/commit/?id=85f4aea77e4b (link may not be stable)
[3/6] Documentation: bcm283x: add Raspberry Pi 5 support
      https://git.pengutronix.de/cgit/barebox/commit/?id=025110663eab (link may not be stable)
[4/6] arm: dts: bcm2712-rpi: specify clock frequency for uart
      https://git.pengutronix.de/cgit/barebox/commit/?id=4c5250c1d2a7 (link may not be stable)
[5/6] arm: dts: bcm2712-rpi: disable wifi SDIO
      https://git.pengutronix.de/cgit/barebox/commit/?id=5a4e8f8e9afd (link may not be stable)
[6/6] bcm283x: debug_ll: add Raspberry Pi 5 UART support
      https://git.pengutronix.de/cgit/barebox/commit/?id=4e086e1f1623 (link may not be stable)

Best regards,
-- 
Sascha Hauer <s.hauer at pengutronix.de>